This G9SX-ADA222-T150-RC DC24 is a general-purpose safety controller from Omron's G9SX series. It runs on 24VDC and packs six solid-state safety outputs plus two auxiliary solid-state outputs, with two digital inputs. Rated to Category 4, PLe, SIL3 — that's the top end of the safety integrity scale, so it handles the highest-risk guard interlock and light curtain applications without needing an external safety PLC.
The built-in delay range of 0 to 150 seconds lets you stagger machine stop sequences — think ejection gates that need to close before a press cycle starts, or conveyor brakes that release after a timed dwell. That delay is adjustable on the unit, so you're not locked into a fixed time at ordering. Logical AND I/O means the safety outputs only turn on when all input conditions are met simultaneously. This is standard for muting or two-hand control schemes where you need both signals present before the machine can run. Spring terminals cut wiring time versus screw clamps — no torque driver needed, just strip and push.
Active and in production — no obsolescence scramble
Production status is current. No last-time buy or end-of-life notice on this order code.