Analog output slice for CJ/CS/NJ systems
The Omron GRT1-DA2V is a SmartSlice output module delivering two analog outputs at 24 VDC. It mounts on a DIN rail with screw termination, rated IP20, operating from -10°C to 55°C. This slice integrates with CJ, CS, and NJ series controllers.
How it compares to the GRT1-ROS2
The GRT1-ROS2 shares the same SmartSlice form factor and 24 VDC supply, but its outputs are two relay contacts rather than analog. If your BOM specifies analog output for a modulating valve or drive reference, the ROS2 will not serve that function without adding a signal conditioner.
Mounting and wiring notes
DIN-rail mount, screw terminals. Maintain separation between analog signal and power wiring to avoid coupling; the slice draws its supply from the backplane or external 24 VDC. Verify polarity before energizing.