J7KNA Series, Contactor, 3 Pole, 24 VDC Coil, 9 A AC, 4 kW, 7.5 HP, DIN Rail/Screw Mount, Screw Terminal.
| Parameter | Value |
|---|---|
| Poles | 3 |
| Series | J7KNA |
| HP rating | 7.5 |
| Mounting | DIN Rail Mount;Screw |
| Termination type | Screw Terminal |
| Coil voltage - DC | 24 V |
| Switching power - AC | 4 kW |
| Contact configuration | 3NO |
| Switching current - AC | 9 A |
| Switching current - DC | 2 A |
| Switching voltage - AC | 690 V |
| Switching voltage - DC | 220 V |
| Auxiliary contact configuration | 1NC |
The J7KNA0901R24D is a 3-pole contactor from the J7KNA series, designed for switching motor loads up to 7.5 HP. Its 24 V DC coil and 9 A AC switching current (4 kW at 690 V) make it suitable for small to medium motor control in panels. The contactor carries one normally-closed auxiliary contact alongside the three normally-open main contacts.
The 24 V DC coil holds at nominal voltage, and the auxiliary 1NC contact allows interlocking or status feedback without an additional block.
The coil is rated for 24 V DC.
The contactor has 3 normally-open (3NO) main poles.
No related articles