The K3GN-NDT1-L1 24VDC: The K3GN-NDT1- 24VDC: The K3GN-NDT1- 24VDC is a panel-mount process meter from Omron's K3GN series, built to display and scale analog process signals — 4-20 mA or ±10 VDC — on a dual-color LCD backlit display. It is a Process Meter type, meaning its job is to read a transmitter or sensor output and show the value as an engineering unit (pressure, flow, level) on the front panel. The display shows five characters per row, each 7.00 mm high, with dual-color backlighting (likely green/red) to flag alarm or normal status at a glance. Three outputs are available: one analog and two solid-state (transistor) outputs, so it can both retransmit the signal to a PLC and drive local alarms or a simple on/off control loop. Power is 24 VDC, which is standard for industrial control panels. The screw-terminal connection keeps wiring straightforward for panel builders — no special tools beyond a screwdriver.
The IP66 front rating means the display and keypad survive washdown — suitable for food, beverage, or chemical environments where a hose-down is routine. The body seals dust-tight and water-resistant, so it can live on a panel door in a wet area without a secondary cover. Panel cutout is 45.00 mm × 22.20 mm (rectangular), a common footprint for compact process indicators. The operating range of -10°C to 55°C covers most indoor plant-floor conditions but not freezers or outdoor enclosures in direct sun — if the panel sees >55°C ambient, derate or move the meter to a cooler spot. The measuring range spans both 4-20 mA and ±10 VDC, so it works with most 2-wire transmitters (pressure, temperature, level) and voltage-output sensors (load cells, accelerometers). The ±10 VDC input also handles bipolar signals, which is useful for differential pressure or position feedback that swings through zero.