Omron NJ3011100 NJ series CPU unit, 2 MB data memory, 5 MB program capacity, 2560 I/O points, EtherCAT/EtherNet/IP/USB, DIN rail mount.
| Parameter | Value |
|---|---|
| Series | NJ |
| Mounting | DIN Rail Mount |
| Communication interface type | EtherCAT;EtherNet / IP;USB |
| Operating voltage max. | 5 V |
| Data memory | 2 MB |
| Expandability | Yes |
| Battery backup | Yes |
| Baud rate max. | 100 Mbps |
| Real-Time clock | Yes |
| Program capacity | 5 MB |
| Input (Output max.) | 2560 I/O Points |
| Programming language used | Ladder Diagram (LD);Structured Text (ST) |
NJ3011100 from Omron's NJ series. DIN-rail CPU with 2 MB data memory and 5 MB program capacity, handling up to 2560 I/O points locally. Onboard EtherCAT, EtherNet/IP, and USB cover the control backbone without option cards.
Mounts on DIN rail with a battery-backed real-time clock and expansion capability. Programming via Ladder Diagram or Structured Text. Communication ports run at up to 100 Mbps.
The NJ1011000 is the closest peer in the NJ series, but it uses rack mounting instead of DIN rail and has 32765 words of data memory (versus 2 MB) with a 3 MB program capacity (versus 5 MB). It is not a direct mechanical or capacity swap.
It is part of Omron's NJ series.
2 MB of data memory.
No. The NJ3011100 mounts on DIN rail, while the NJ1011000 is rack-mount. The mounting hardware is different, so physical installation would require panel rework.
No related articles