Skip to main content
Log in
Omron R88ACRGB010CRE — Servo Motors

R88ACRGB010CRE Encoder Cable, 10 m, G Servo

MPNR88ACRGB010CRE

Omron R88ACRGB010CRE, 10 m servo motor encoder cable, listed for G Servo Motors, lifecycle_stage current.

Omron R88ACRGB010CRE datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

R88ACRGB010CRE — Specifications
ParameterValue
Suitable forG Servo Motors
Accessory typeEncoder Cable

Product details

The R88ACRGB010CRE is a 10 m encoder cable listed as suitable for G Servo Motors, the accessory class that carries the feedback signal between the servo amplifier and the motor-mounted encoder.

Where this class of cable lands

Servo motor encoder cables in this class run the incremental or absolute position feedback from the motor back to the drive; the 10 m length is the headline spec because it sets how far the motor can sit from the panel before the feedback budget starts to erode.

Sourcing close

Frequently asked questions

What motor family is R88ACRGB010CRE listed for?

It is listed for G Servo Motors, the family the cable was designed to terminate against on the motor and amplifier ends.

What kind of accessory is it?

It is an encoder cable, carrying the feedback signal between the servo motor and its drive.

Will it drop into a panel that was specified around R88ACR1B003NFE?

No — the R88ACR1B003NFE is listed for 1S Servo Motors, a different motor family, so it is not a same-function substitute for a G-series cable run even at a similar length.

MPN
R88ACRGB010CRE