The Omron R88M1L1K030CBS2 is a 1S series servo motor delivering 3.18 Nm continuous torque at 3000 min-1 output speed, drawing 3 A rated current from a 323-528 VAC supply. That torque curve suits direct-drive or low-ratio applications on indexing tables, pick-and-place axes, or conveyor segments where the load inertia is well-matched to the motor's rotor inertia. The 209 mm frame length and 100 mm square cross-section fit standard servo-mounting footprints; verify the pilot diameter and bolt pattern against your existing bracket before committing the BOM line.
Integration notes
The 1S series mates with Omron's 1S servo drives via a standard motor power and encoder feedback cable set. The 3 A rated current keeps the motor within the continuous output range of the R88D-1SN04H drive (4 A continuous). Mount the motor with the keyway and shaft seal oriented to prevent coolant ingress on vertical-axis installations. The 3000 min-1 base speed allows a 1:1 pulley ratio for most linear-motion applications without a gearbox.