What this servo motor delivers
The Omron R88M1L1K030TBS2 is a 1S series servo motor rated for 3.18 Nm of continuous torque at 3000 min⁻¹ output speed. That torque figure tells you what load it can accelerate and hold at speed — 3.18 Nm suits medium-duty indexing, pick-and-place axes, or conveyor positioning where the load inertia is moderate. The 5.2 A rated current is the winding draw at full load, so size your drive's continuous output stage to at least that figure.
Voltage range and drive pairing
Operating voltage spans 170 V to 264 V AC, which covers standard 200 V and 240 V single-phase or three-phase lines. That 170 V lower limit means it holds torque through a brownout or a long cable run with voltage drop — useful on lines fed from a shared transformer. Match it to a drive that outputs the same voltage class and can supply the 5.2 A continuous.
Frame size and retrofit fit
The frame measures 209 mm wide by 100 mm tall by 100 mm deep. That 209 mm width is the critical dimension for bolting onto a machine base or replacing an existing motor of similar flange size. The 100 mm square body is compact enough for tight axis assemblies. Verify the pilot diameter and bolt pattern against your mounting plate before committing the BOM line.