The R88MK2K020FBS2: Rated torque of 9.55 Nm at 2000 min⁻¹ output speed defines the mechanical load this motor can drive continuously — sizing it for a direct-drive or geared axis means matching that torque-speed envelope to the load profile. The 5.9 A rated current is the winding draw at full load; the drive supplying it must be rated for at least that continuous current plus a margin for acceleration peaks. Verify the drive's DC bus voltage matches the motor's winding insulation class; at 528 V upper end, the motor can ride through a high-line condition without saturating the magnetic circuit. The 198 mm width, 130 mm height, and 130 mm length frame dimensions determine the footprint on the machine base or adapter plate. Check the pilot diameter and bolt pattern from the mechanical drawing — the frame size is consistent with the G5 series medium-torque bracket.
G5-series servo motors are deployed in positioning and speed-control axes on packaging lines, assembly stations, material-handling shuttles, and CNC auxiliary axes. The 9.55 Nm / 2000 min⁻¹ rating suits it for indexing tables, belt drives, and ball-screw stages where the load inertia is moderate and response time matters.