Motor specs at a glance
The Omron R88M1L4K030CS2 is a 1S-series servo motor rated for 12.7 Nm of torque at 3000 min-1 output speed, drawing 12.8 A across a 323 to 528 V operating range. That torque figure is what you spec against the load — 12.7 Nm continuous means it'll handle a moderate index table or a small-axis ball screw without overheating on the route. The 3000 min-1 top speed is standard for a 3 kW-class frame; if you need more grunt at lower RPM, you're looking at a different frame size.
Mounting and fit
Frame dimensions are 208 mm wide by 130 mm tall by 130 mm deep — that's a compact footprint for the torque class, so it squeezes into a tight machine envelope without drilling new holes. The 1S series uses a standard flange pattern; verify the pilot diameter and bolt circle against your existing mount before committing the BOM line.
Lifecycle and sourcing
Sourcing is straightforward through our channel: quoted to order against an RFQ, no long lead-time surprises expected.