The Omron R88MK75030TBS2 is a G5 Series servo motor delivering 2.4 Nm of continuous torque at a rated speed of 3000 min⁻¹, drawing 4.1 A under load. That torque figure tells you the motor can hold a 2.4 Nm constant load — think a small indexing table or a pick-and-place Z-axis — without exceeding thermal limits. The 3000 min⁻¹ output speed matches the common base speed for a 3:1 or 5:1 gearhead; if your application needs higher torque at the load, budget for a reduction stage. Input voltage range is 170–264 V, which covers most single-phase and three-phase line supplies in the 200 V class, but verify your drive's DC bus voltage matches this motor's winding design.
The frame measures 199 mm in width, 80 mm in height, and 80 mm in length. That 199 mm width is the longest dimension — it dictates the clearance in a cable trough or the spacing between mounting bolts on a machine base. The 80 mm square cross-section is standard for a 2.4 Nm class servo, so it fits the usual motor-mount flange pattern for this torque range.