Skip to main content
Log in
Omron S8FSG10005CD — DIN Rail Power Supplies

Omron S8FSG10005CD DIN Rail Power Supply, 100 W, 5 VDC, 16 A

MPNS8FSG10005CD

Omron S8FS-G series, S8FSG10005CD, single-phase switching power supply, DIN rail mount, 100 W rated output, 5 VDC, 16 A.

$125.43Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S8FSG10005CD key specifications
ParameterValue
SeriesS8FS- G
Wire connection typeScrew Terminals
Input voltage100 to 240V AC
Output voltage - nominal5 V DC
Current - inrush28 A
Output current16 A
Power supply styleSwitching
Output power - rated100 W
Input frequency - minimum47 Hz
Input frequency - nominal50/60 Hz
Input frequency - maximuim450 Hz
PhasesSingle

All specifications

S8FSG10005CD additional specifications
ParameterValue
MountingDIN Rail
Wire size - maximum12 AWG
Operating temperature - maximum158 °F
Operating temperature - minimum-4 °F
Overall depth6.58 in
Overall width1.54 in
Overall height3.82 in
Housing materialAluminum; Stainless Steel
Mean time between failures135,000 hr
StandardscUL; cUR; SEMI F47-0706 (200 VAC input); UL 508 (Listing); UL: UL 60950-1 (Recognition); VDE
Special featuresAutomatic Reset; LED Diagnostic Indicators; Overload Protection; Overvoltage Protection; Series Operation
Status indicatorGreen LED
Hold up time - minimum12 msec
Output noise - maximum70 mV
Start up time - maximum1,000 msec
Maximum efficiency @ 230V AC81 %

Product details

What this power supply delivers

The Omron S8FSG10005CD is a single-phase switching power supply from the S8FS-G series, delivering 100 W at 5 VDC and 16 A continuous output. Input range covers 100 to 240 VAC at 50/60 Hz, with a wide frequency tolerance up to 450 Hz. Inrush current peaks at 28 A, so factor that into upstream breaker coordination. Output noise is capped at 70 mV maximum, and hold-up time is a minimum of 12 msec — enough to ride through a half-cycle dropout on a 50 Hz line. Start-up time is 1,000 msec maximum.

This unit carries cUL, cUR, and UL 508 listing, plus UL 60950-1 recognition. It also meets SEMI F47-0706 voltage sag immunity at 200 VAC input, which matters if it's feeding semiconductor fab or similar process equipment. VDE approval is also on the nameplate.

Integration and protection features

Housing is aluminum and stainless steel — corrosion-resistant for industrial environments. Screw terminals accept up to 12 AWG wire. A green LED indicates output status. Built-in overload and overvoltage protection with automatic reset. Series operation is supported if you need to stack outputs for higher voltage. MTBF is rated at 135,000 hours. Operating temperature range is -4°F to 158°F (-20°C to 70°C). Maximum efficiency at 230 VAC input is 81%.

Frequently asked questions

Where can I buy S8FSG10005CD and get a price?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm response.

What are the key output ratings of S8FSG10005CD?

It delivers 100 W at 5 VDC, with a continuous output current of 16 A. Output noise is 70 mV maximum, and hold-up time is 12 msec minimum.

What compliance documentation does Omron provide for S8FSG10005CD?

The unit is cUL, cUR, and UL 508 listed, UL 60950-1 recognized, SEMI F47-0706 compliant at 200 VAC input, and VDE approved. These certifications cover North American and European regulatory requirements.

MPN
S8FSG10005CD