The Omron S8FSG15024CD is a 150 W DIN-rail switching power supply delivering 24 V DC at 6.5 A from a single-phase 100-240 V AC input. The 90% efficiency at 230 V AC keeps heat dissipation low in a crowded enclosure.
Rated 150 W continuous at 6.5 A output, 24 V DC nominal — enough to power a small control cabinet's 24 VDC loads: a handful of contactors, a compact PLC, and a few sensors. The single-phase input accepts 100-240 V AC at 47-450 Hz, which covers standard mains (50/60 Hz) and higher-frequency supplies found in some industrial settings. Inrush current is limited to 28 A, so it won't nuisance-trip a B-curve MCB on power-up. Hold-up time is a minimum of 10 msec (55 msec typical) at full load — enough to ride through a half-cycle dropout and keep a PLC from cycling its outputs. Output noise is spec'd at 110 mV max, which is within tolerance for most digital I/O and analog inputs; if you're feeding a sensitive measurement chain, add a small output filter cap at the load. Built-in protections include overload, overvoltage, and automatic reset — meaning it recovers from a temporary overload without a manual reset, which saves a truck roll on a remote panel. The green LED gives a quick visual confirmation the rail is alive.