32 mm wide, 30 W on a single DIN slot
The Omron S8VKS03024 sits in the S8VK-S line as a 30 W panel-mount PSU delivering a single adjustable 24 V output at 1.3 A — a compact, single-phase brick for 24 V control rails in machine and process panels where DIN-rail real estate is at a premium. The 32 mm width keeps it on one DIN pitch even next to a slim contactor; the 90 mm depth and 90 mm height match the standard S8VK-S footprint, so it drops into existing cut-outs without re-drilling the gland plate.
Input envelope and isolation barrier
Accepts 85 V to 264 VAC on a nominal 100 to 240 VAC input, meaning the same unit rides on 120 V North American and 230 V European mains without re-tapping — useful for builders shipping the same panel to both markets. Insulation voltage is rated at 3 kV between input and output, which is the working clearance a PSU in this class needs to clear regulatory hipot on the field side of a control cabinet.
Output quality and thermal headroom
86 % efficiency at full load keeps waste heat modest in a sealed enclosure, and ripple and noise at 190 mV is well inside the budget that 24 V PLC inputs and relay coils tolerate without chatter.
Reliability floor and lifecycle posture
MTBF on the S8VK-S line is published at 135000 h — the figure a maintenance planner uses to budget replacement intervals on lines that run two or three shifts.