The Omron S8VK-X12024-EIP is a 120 W switching power supply from the S8VK-X series, delivering 24 V DC at 5 A from a single-phase 100-240 V AC input. Mounted on DIN rail with IP20 enclosure, it suits control cabinet installation for PLC loads, sensors, and small actuators.
Key ratings and what they mean
Rated 120 W continuous — enough for small automation loads. The 35 ms hold-up time keeps output up through a half-cycle dropout on 50/60 Hz mains. Efficiency of 90% and 92% reduces waste heat. Output noise is capped at 150 mV, which is standard for this class — no additional filtering needed for most digital loads. Inrush current is 32 A peak; budget the upstream breaker for that. Parallel capability (built-in) means you can gang two units for redundancy or higher current without external diodes, and the alarm relay and green/red LEDs give immediate status at the cabinet door.
Mounting and wiring
DIN rail mount, footprint 2.17 in × 3.73 in × 3.63 in — fits standard DIN rails. Wire range 18-14 AWG on push-in terminals. Single-phase input.