What the SS-5GL1375-2T is on the panel
The Omron SS-5GL1375-2T is a subminiature snap-action limit switch in the SS series, the SPDT contact block most often specified where a position-confirmation signal needs to fire inside tight machinery envelopes — actuator arms, hinge pins, sliding guards on packaging and assembly equipment. As a limit switch, it converts mechanical travel into an electrical switching event at a defined cam or dog position, with the snap-action mechanism delivering a clean make-or-break independent of actuator speed up to the rated operating frequency.
Production status and how it is supplied
Lifecycle stage reads current, meaning the SS-5GL1375-2T remains in normal production from Omron with no official successor or cross-reference flagged on the record.
Panel-side integration checklist
On the equipment side, the SS series footprint assumes standard snap-action mounting hardware and a wiring entry sized for the contact rating; the SPDT block supports either NO or NC wiring depending on which terminal is used, so the same order code serves two logic outcomes at the cam. For MRO replacement, swapping in a SS-5GL1375-2T against an existing SS-series position is a like-for-like drop — confirm the actuator type, plunger length, and terminal orientation against the BOM before committing the spare, since the family carries lever, plunger, and simulated-roller variants that share the body but not the actuator geometry.