Input flexibility and control loop
The E5CC-TQQ3D5M-003: Accepts RTD, thermocouples (B, E, J, K, L, N, PLII, R, S, T, U, W) and analog signals (0–20 mA, 0–10 VDC) covering a span from -200°C to 2300°C — one unit handles most process loops without a signal conditioner. Control method is selectable between On/Off and PID with auto-tune; the dual-color LCD backlight shows process value and setpoint on separate 4-character rows, 0.600" and 0.280" tall respectively.
Outputs and heater fault detection
Three relay outputs handle direct contactor or alarm switching; two voltage-pulse outputs drive external SSRs for faster cycling on electric heaters or valve actuators. Built-in heater fault detection monitors the load current via an external CT and flags a broken heater or SSR short — a common failure mode in electric heat zones that saves troubleshooting time.
Panel-mount with a 45.0 mm square cutout; the front bezel carries an IP66 rating — dust-tight and protected against hose-down, so it is suitable for food, beverage, or washdown areas. Operates from -10°C to 55°C ambient; supply voltage is 24 VAC/DC, screw-terminal connection.
Communications and lifecycle
RS-485 port supports Modbus RTU and Omron CompoWay/F protocol, allowing setpoint ramping, data logging, and remote monitoring over a plant network.
