Skip to main content
Mitsubishi Electric MR-JE-100B

Mitsubishi Electric MR-JE-100B Servo Amplifier, 5.0 A Input

MPN MR-JE-100B

Mitsubishi Electric MR-JE-100B servo amplifier, 5.0 A rated input current (3-phase or 1-phase 200 V AC), 6.0 A output, built-in dynamic brake, SSCNET III/H, IP20, 1.5 kg.

$430.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MR-JE-100B specifications
ParameterValue
Product typeServo Amplifier
Voltage24 V DC ± 10%
Current5 A
Weight1.5 kg
UL standardUL 508C

Product details

Power stage and network cycle

The MR-JE-100B is a servo amplifier from the MR-JE series, rated for a 3-phase or 1-phase 200 V AC input supply drawing 5.0 A, with a permissible fluctuation window of 170 V AC to 264 V AC at ±5% frequency tolerance. Its output stage delivers 3-phase 170 V AC at 6.0 A using sine-wave PWM current control, and the built-in dynamic brake absorbs the regenerative energy during deceleration — no external resistor needed for most duty cycles. On the motion network side, the amplifier communicates over SSCNET III/H at a cycle time selectable between 0.444 ms and 0.888 ms, which sets the position-loop update rate for the connected servo motor.

Compliance and enclosure

The MR-JE-100B carries a CE Declaration of Conformity covering the Low Voltage Directive (EN 61800-5-1) and EMC Directive (EN 61800-3), plus UL 508C listing — fully documented compliance for panels shipping into North American and European markets.

Control power and physical fit

The interface power supply is a separate 24 V DC ± 10% circuit drawing 0.3 A — this keeps the control electronics live even when the main 200 V bus is off, so the SSCNET III/H network and parameter settings hold during a power-down.

MPN
MR-JE-100B