Schneider 140DDM39000C — now discontinued, supplied from remaining surplus and broker stock.
| Parameter | Value |
|---|---|
| Protection type | On input by resistor limited Internal output protection by 5 A fuse per group On output by transient voltage suppression |
| Range of product | Modicon Quantum automation platform |
| Discrete output type | Solid state |
| Product or component type | Mixed discrete I/O module |
| Input voltage limits | 56 V during 1.3 ms 30 V |
| Maximum voltage drop | <0.4 V 0.5 A |
| Output voltage limits | 19.2...30 V DC typical 56 V DC during 1.3 ms |
| Discrete input voltage | 24 V DC |
| Discrete output voltage | 24 V |
| Voltage state 0 guaranteed | -3...5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Maximum load current | <= 4 A per module |
| Parameter | Value |
|---|---|
| Bus current requirement | 330 mA |
| Maximum leakage current | 0.4 mA 30 V DC |
| Current state 0 guaranteed | = 2 mA |
| Power dissipation | 1.75 W + (0.36 x input point on) + (1.1 total output load current) |
| Network frequency limits | 47...63 Hz |
| Response time on output | <= 1 ms at state 1 to state 0 |
| Relative humidity | 95 % without condensation |
| Operating altitude | <= 16404.2 ft (5000 m) |
| Standards | UL 508 CSA C22.2 No 142 FM Class 1 Division 2 |
| Marking | CE |
| Category | 18155-QUANTUM I/O & POWER SUPPLIES |
| Input impedance | 2500 Ohm |
| Fault indication | Loss of field power on output Blown fuse on output |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for no voltage in output and input (F) 2 LEDs (green) for output is turned on 2 LEDs (red) for fault detected on the input point 2 LEDs (red) for fault detected on the output point |
| Discrete i (O number) | 24 |
| Discrete input logic | Sink |
| Protective treatment | Conformal coating Humiseal 1A33 |
| Discrete input number | 16 2 groups of 8 |
| Discrete output logic | Sink |
| Addressing requirement | 0.5 output word 1 input word |
| Associated fuse rating | 5 A per group |
| Discrete output number | 8 2 groups of 4 |
| Absolute maximum output | 5 A during 500 µs per point |
| Isolation between group | 500 Vrms for 1 minute |
| Maximum load inductance | 500 mH 4 Hz |
| Maximum load capacitance | 50 µF |
| Isolation between group and bus | 1780 Vrms for 1 minute |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Resistance to electromagnetic fields | 9.1 V/m (10 V/m) 80...1000 MHz IEC 801-3 |
| Ambient air temperature for operation | 32...140 °F (0...60 °C) |
| Resistance to electrostatic discharge | 4 kV contact IEC 801-2 8 kV on air IEC 801-2 |
The 140DDM39000C is a Modicon Quantum mixed discrete I/O module carrying 16 sink inputs in two groups of 8 and 8 solid-state sink outputs in two groups of 4, all on a 24 V DC bus drawing 1.75 W from the rack. It holds CE, cUL, UL 508, CSA C22.2 No 142, and FM Class 1 Division 2 certifications, with conformal coating (Humiseal 1A33) for harsh environments.
No related articles