The Modicon Quantum 140DDO35301C is a 32-point discrete output module sourcing 24 V DC positive logic to loads. Each group of eight outputs carries a 4 A limit, and the module total caps at 16 A. The 1 ms response time (state 0 to 1) suits fast solenoid banks, but the 2 A surge current per point and the inductance formula L = 0.5/(I² × f) mean inductive loads need duty-cycle consideration. Internal 5 A group fuses blow on overload, lit by the red Fault LED; the green Active LED shows bus communication.
Schneider 140DDO35301C Quantum 32pt DC Output
MPN140DDO35301C
End of Life
Schneider Electric Modicon Quantum 140DDO35301C 32-point DC discrete output module, 24 V DC, 16 A per module, 4 A per group, positive logic.
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →Specifications
| Parameter | Value |
|---|---|
| Protection type | Internal output protection by 5 A fuse per group |
| Range of product | Modicon Quantum automation platform |
| Product or component type | Dc discrete output module |
| Maximum voltage drop | <0.4 V 0.5 A |
| Output voltage limits | 19.2...30 V |
| Discrete output voltage | 24 V DC |
| Surge current | 2 A |
| Maximum load current | 16 A per module 4 A per group |
| Bus current requirement | 330 mA |
| Maximum leakage current | 1 mA 24 V |
| Power dissipation | 5 W |
| Response time | <= 1 ms at state 0 to state 1 |
All specifications
| Parameter | Value |
|---|---|
| Relative humidity | 95 % without condensation |
| Operating altitude | <= 16404.2 ft (5000 m) |
| Standards | UL 508 CSA C22.2 No 142 |
| Marking | CE |
| Category | US1PC2118155 |
| Module format | Standard |
| Load inductance | Inductance(H) = 0.5/((current(A))² x (switching frequency(Hz))) |
| Fault indication | Blown fuse Loss of field power |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault detected (F) 32 LEDs (green) for input status |
| Group of channels | 4 groups of 8 |
| Protective treatment | Conformal coating Humiseal 1A33 |
| Discrete output logic | Positive logic (source) |
| Addressing requirement | 2 output words |
| Associated fuse rating | 3 A each point 5 A per group |
| Discrete output number | 32 |
| Absolute maximum output | 50 V 1 s decaying pulse |
| Isolation between group | 500 Vrms DC for 1 minute |
| Isolation between channels and bus | 1780 Vrms DC for 1 minute |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Resistance to electromagnetic fields | 9.1 V/m (10 V/m) 80...2000 MHz IEC 801-3 |
| Ambient air temperature for operation | 32...140 °F (0...60 °C) |
| Resistance to electrostatic discharge | 4 kV contact IEC 801-2 8 kV on air IEC 801-2 |
Product details
Frequently asked questions
What are the key ratings of the 140DDO35301C?
It has 32 discrete outputs at 24 V DC positive logic, 16 A per module total, 4 A per group of eight, response time <=1 ms, surge current 2 A per point, and 1780 Vrms isolation between channels and bus.
What compliance standards does the 140DDO35301C meet?
The module carries CE marking and is listed under UL 508 and CSA C22.2 No 142.
How is the output protected on the 140DDO35301C?
Outputs are protected by internal 5 A fuses per group; a blown fuse trips the red Fault LED and a fault indication signal.
MPN
140DDO35301C