Skip to main content
Log in
Schneider Electric A9D73610T — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9D73610T Acti9 ISPN Vigi RCBO, 10 A, C-c

MPNA9D73610T
Active

Schneider Electric Acti9 ISPN Vigi RCBO, 1P+N, 10 A, C-curve, 30 mA earth leakage, 6000 A breaking capacity, 18 mm wide, clip-on DIN rail.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9D73610T — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage protection class / typeType A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage dependent
Trip unit technologyThermal-magnetic
Local signalling / indicationON/OFF indication
A9D73610T — Electrical Ratings
ParameterValue
Rated current (In)10 A
Rated operational voltage (Ue)230/240 V AC 50 Hz
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)500 V AC 50 Hz
Rated impulse withstand voltage (Uimp)4 kV
Device location in systemOutgoer
Electrical durability6000 cycles
Mechanical durability (operating cycles)10000 cycles
A9D73610T — Identification
ParameterValue
Product nameISPN Vigi
Product / component typeResidual current breaker with overcurrent protection (RCBO)
Product range / familyActi9
A9D73610T — Mechanical
ParameterValue
Mounting supportDIN rail Chassis
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules2
Terminal connectionsTunnel type terminal (upstream) 1...25 mm² rigid Tunnel type terminal (downstream) 1...16 mm² rigid Tunnel type terminal (upstream) 1...16 mm² flexible Tunnel type terminal (downstream) 1...10 mm² flexible
Wire stripping length13 mm for downstream connection 14 mm for upstream connection
Terminal tightening torque3.5 N.m upstream 2 N.m downstream
Width18 mm
A9D73610T — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...85 °C
IP degree of protectionIP20
Pollution degree2
Relative humidity95 % at 55 °C
Tropicalisation2
A9D73610T — Approvals
ParameterValue
StandardsAS/NZS 61009.1

Product details

Rated 10 A with a C-curve magnetic trip (5 to 10 x In), it clears faults up to 6000 A Icn at 230/240 V AC 50 Hz. The 30 mA sensitivity covers personnel protection against direct contact, and the C-curve suits mixed resistive-inductive loads like small motor circuits or lighting banks where inrush isn't extreme.

Tightening torque: 3.5 N·m upstream, 2 N·m downstream. IP20 finger-safe front, so it lives inside an enclosure — no washdown rating. Padlockable with a Ø4 mm padlock for lockout/tagout.

The Acti9 range is Schneider's standard DIN-rail platform for final-distribution panels, so it's widely stocked and cross-referenced.

Frequently asked questions

How do I get current pricing and availability for A9D73610T?

Submit an RFQ through this listing. The part is sourced to order via independent distribution; pricing and stock are confirmed at quote time.

What is the closest alternative to A9D73610T in the Acti9 family?

Within the Acti9 ISPN Vigi range, the key variant differences are rated current (In) and curve. This is a 10 A C-curve unit; a 16 A or 20 A C-curve sibling would swap in if the load requires higher continuous current, but the 30 mA earth-leakage and 6 kA breaking capacity remain the same across the family.

What compliance documentation does Schneider provide for A9D73610T?

The part is certified to AS/NZS 61009.1, the Australian/New Zealand standard for RCBOs. Schneider typically provides a declaration of conformity and test reports on request.

MPN
A9D73610T