Skip to main content
Log in
Schneider Electric BMI0703T01A

BMI0703T01A Single-Phase Servo Motor, 700W, Hiperface, 300mm

MPNBMI0703T01A
Obsolete

Bosch Rexroth BMI series, BMI0703T01A single-phase servo motor, 700 W (230 V) / 400 W (115 V), 3200 rpm, absolute single-turn SinCos Hiperface feedback, 300 mm length, 70 mm flange.

Schneider Electric BMI0703T01A datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI0703T01A key specifications
ParameterValue
Feedback typeAbsolute single turn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.8 A 115 V, single phase 17.8 A 230 V, single phase
Output current 3s peak10.5 A 230 V 3 s
Continuous stall current3.5 A
Continuous output current3.5 A 8 kHz
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI0703T01A additional specifications
ParameterValue
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length11.8 in (300 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed3200 rpm 230 V single phase 1400 rpm 115 V single phase
Rotor inertia1.67 kg.cm²
Nominal torque25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase
Shaft diameter0.6 in (14 mm)
Torque constant0.81 N.m/A 68 °F (20 °C)
Back emf constant54.44 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase
Stator inductance2.28 mH 68 °F (20 °C)
Stator resistance2.58 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 115...230 V single phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant0.88 ms 68 °F (20 °C)

Product details

Servo motor key ratings and feedback

The Bosch Rexroth BMI0703T01A is a single-phase servo motor from the BMI series, rated 700 W at 230 V single-phase supply and 400 W at 115 V. It delivers a nominal torque of 19.5 lbf·in (2.2 N·m) at 230 V and 25.7 lbf·in (2.9 N·m) at 115 V, with a peak stall torque of 76.1 lbf·in (8.6 N·m) at either voltage. Feedback comes from an absolute single-turn SinCos Hiperface encoder, providing position and speed data over the motor's 10-pole design.

Mounting and mechanical interface

The motor mounts on an international standard flange with a 2.8 in (70 mm) flange size and a 2.4 in (60 mm) centring collar. The shaft diameter is 0.6 in (14 mm) with a 1.2 in (30 mm) untapped shaft end; no second shaft end is present. Cooling is by natural convection only, so ensure free airflow around the housing. Electrical connection uses a printed circuit board connector — plan the cable exit accordingly.

MPN
BMI0703T01A