Skip to main content
Log in
Schneider Electric BMI0703T02F

BMI0703T02F BMI Servo Motor, Single-Phase 3200 rpm, IP65, Ho

MPNBMI0703T02F
Active

BMI series servo motor, MPI BMI0703T02F, single-phase 100..240 VAC, 3200 rpm nominal at 230V, IP65 housing, absolute multiturn Hiperface feedback, integrated holding brake.

$2,710.00Ref. price · indicative, final on quote
Schneider Electric BMI0703T02F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0703T02F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.8 A 115 V, single phase 17.8 A 230 V, single phase
Output current 3s peak10.5 A 230 V 3 s
Continuous stall current3.5 A
Continuous output current3.5 A 8 kHz
Brake pull-in power5 W
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0703T02F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length13.3 in (339 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed3200 rpm 230 V single phase 1400 rpm 115 V single phase
Rotor inertia1.78 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase
Shaft diameter0.6 in (14 mm)
Torque constant0.81 N.m/A 68 °F (20 °C)
Back emf constant54.44 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase
Stator inductance2.28 mH 68 °F (20 °C)
Stator resistance2.58 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 115...230 V single phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant0.88 ms 68 °F (20 °C)

Product details

The BMI0703T02F is a single-phase servo motor from the BMI series, built for reliable positioning in environments where dust and heat are facts of life. Housing is sealed to IP65, shaft seal to IP54 — that keeps cement dust out of the windings and bearings. An integrated holding brake (26.6 lbf.in / 3 N.m) holds vertical loads without a separate brake unit. Feedback is absolute multiturn SinCos Hiperface, so you don't lose position after a power cycle.

Integration and mounting notes

Mounts on an international standard flange (70 mm flange size, centring collar depth 2.5 mm). Electrical connection is via PCB connector — plan a mating header and cable strain relief. Cooling is natural convection, so no fan to clog. The integrated EMC filter saves panel space and avoids external filter wiring.

Frequently asked questions

What is the listed phase of the BMI0703T02F?

It is a single-phase servo motor, rated for 100…240 VAC supply.

What is the length of the BMI0703T02F?

The motor body length is 13.3 in (339 mm).

MPN
BMI0703T02F