Skip to main content
Log in
Schneider Electric BMI0703T17A

BMI0703T17A BMI Servo Motor, Single Phase, 700W, Hiperface

MPNBMI0703T17A
Obsolete

Bosch Rexroth BMI0703T17A single-phase servo motor, 700 W, 2.9 N·m, Hiperface feedback, IP65 housing.

Schneider Electric BMI0703T17A datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI0703T17A key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.8 A 115 V, single phase 17.8 A 230 V, single phase
Output current 3s peak10.5 A 230 V 3 s
Continuous stall current3.5 A
Continuous output current3.5 A 8 kHz
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5...63 Hz

All specifications

BMI0703T17A additional specifications
ParameterValue
Number of motor poles10
PhasesSingle phase
IP degree of protectionShaft IP54 Housing IP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (5 mm)
Centring collar depth0.10 in (2.5 mm)
Length11.8 in (300 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed3200 rpm 230 V single phase 1400 rpm 115 V single phase
Rotor inertia1.67 kg.cm²
Nominal torque25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase
Shaft diameter0.6 in (14 mm)
Torque constant0.81 N.m/A 68 °F (20 °C)
Back emf constant54.44 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase
Stator inductance2.28 mH 68 °F (20 °C)
Stator resistance2.58 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 115...230 V single phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution32768 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant0.88 ms 68 °F (20 °C)

Product details

Single-Phase Servo Motor with Hiperface Feedback

Per the specification, the BMI0703T17A is a single-phase servo motor with an integrated EMC filter, rated at 700 W nominal output power when supplied at 230 V single phase. Feedback is via an absolute multiturn SinCos Hiperface encoder for precise position and speed control. Shaft IP54, housing IP65.

Mounting and Mechanical Interface

Flange size 70 mm with centring collar 60 mm diameter, depth 2.5 mm. Shaft diameter 14 mm, keyway width 5 mm, shaft length 30 mm. Mounting via 5.5 mm holes. Natural convection cooling; no forced air required. Electrical connection via printed circuit board connector.

MPN
BMI0703T17A