Skip to main content
Log in
Schneider Electric BMI0703T22F

BMI0703T22F Servo Motor, 700W Single-Phase, IP65, Hiperface

MPNBMI0703T22F
Obsolete

Bosch Rexroth BMI0703T22F, single-phase servo motor, 700 W (230 V) or 400 W (115 V), absolute multiturn SinCos Hiperface feedback, holding brake, IP65.

$1,325.00 – $2,765.00Ref. price · indicative, final on quote
Schneider Electric BMI0703T22F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0703T22F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.8 A 115 V, single phase 17.8 A 230 V, single phase
Output current 3s peak10.5 A 230 V 3 s
Continuous stall current3.5 A
Continuous output current3.5 A 8 kHz
Brake pull-in power5 W
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0703T22F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Centring collar depth0.10 in (2.5 mm)
Length13.3 in (339 mm)
CategoryUS1PC5618287
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed3200 rpm 230 V single phase 1400 rpm 115 V single phase
Rotor inertia1.78 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase
Shaft diameter0.6 in (14 mm)
Torque constant0.81 N.m/A 68 °F (20 °C)
Back emf constant54.44 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase
Stator inductance2.28 mH 68 °F (20 °C)
Stator resistance2.58 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 115...230 V single phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant0.88 ms 68 °F (20 °C)

Product details

The BMI0703T22F: Single-phase servo motor running 100–240 VAC, 50/60 Hz. Delivers 700 W at 230 V or 400 W at 115 V nominal output. Integrated EMC filter keeps line-side emissions within class without an external choke. Absolute multiturn SinCos Hiperface feedback means no homing run after power cycle — position is known immediately. Holding brake rated 3 Nm holds the load in a power-off condition, eliminating a separate brake controller. IP65 housing and natural convection cooling suit washdown and dusty environments. Standard 70 mm flange, 14 mm shaft with an untapped end. Shaft length 30 mm; integral centring collar depth 2.5 mm. PCB connector for power and feedback signals — no flying leads to manage.

Feedback resolution is absolute multiturn, not incremental. If you're replacing an older incremental-encoder motor, check the drive compatibility — Hiperface requires a matching interface. The integrated holding brake draws 5 W pull-in power; no extra relay needed if the drive has a brake control output.

Frequently asked questions

What is the shaft length and diameter of the BMI0703T22F?

Shaft diameter is 14 mm, shaft length is 30 mm. The shaft end is untapped.

Does the BMI0703T22F include a holding brake?

Yes, it has an integrated holding brake with holding torque of 3 Nm and pull-in power of 5 W.

MPN
BMI0703T22F