Skip to main content
Log in
Schneider Electric BMI0703T37F

BMI0703T37F single-phase servo motor, 700 W, active

MPNBMI0703T37F
Active

BMI0703T37F single-phase servo motor, 700 W nominal output, with holding brake and absolute multiturn Hiperface feedback.

Schneider Electric BMI0703T37F datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

BMI0703T37F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits100...240 V
Supply voltage115...230 V - 15...10 %
Maximum current irms17.8 A 115 V, single phase 17.8 A 230 V, single phase
Output current 3s peak10.5 A 230 V 3 s
Continuous stall current3.5 A
Continuous output current3.5 A 8 kHz
Brake pull-in power5 W
Nominal output power700 W 230 V single phase 400 W 115 V single phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0703T37F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesSingle phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (5 mm)
Centring collar depth0.10 in (2.5 mm)
Length13.3 in (339 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed3200 rpm 230 V single phase 1400 rpm 115 V single phase
Rotor inertia1.78 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase
Shaft diameter0.6 in (14 mm)
Torque constant0.81 N.m/A 68 °F (20 °C)
Back emf constant54.44 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase
Stator inductance2.28 mH 68 °F (20 °C)
Stator resistance2.58 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks3
Continuous stall torque30.09 lbf.in (3.4 N.m) 115...230 V single phase
Maximum radial force fr730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution32768 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant0.88 ms 68 °F (20 °C)

Product details

Rating and fit

The BMI0703T37F operates on 100–240 V single-phase supply (50/60 Hz) and delivers 700 W nominal output power at 230 V, or 400 W at 115 V. The holding brake applies 3 Nm (26.6 lbf·in) to hold a vertical or inertial load at standstill. With absolute multiturn SinCos Hiperface feedback, position is retained through power cycles — no home-finding required on restart.

Mechanical integration

The motor mounts via a 70 mm flange (international standard) with a 14 mm keyed shaft. Overall length is 339 mm (13.3 in) including the integrated EMC filter cavity. The IP65 enclosure handles washdown or dusty environments provided the connector is properly seated. Natural convection cooling means no external fan; panel builders should allow clearance around the housing for airflow.

Frequently asked questions

What is the listed phase for BMI0703T37F?

Single phase.

What is the overall length of BMI0703T37F?

13.3 in (339 mm).

MPN
BMI0703T37F