Skip to main content
Log in
Schneider Electric BMXNOE0100H

Schneider Electric BMXNOE0100H Modicon M340 Ethernet Module,

MPNBMXNOE0100H
Active

Schneider Electric, Modicon M340 platform, Ethernet TCP/IP network module, BMXNOE0100H, 10BASE-T/100BASE-TX RJ45, IP20, conformal coating.

$849.63 – $1,734.00Ref. price · indicative, final on quote
Schneider Electric BMXNOE0100H datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMXNOE0100H key specifications
ParameterValue
Control typeRESET push-button cold restart
Range of productModicon M340 automation platform
Product or component typeEthernet TCP/IP network module
Integrated connection typeEthernet TCP/IP RJ45 10/100 Mbit/s 1 twisted pair transparent ready class B30
Current consumption90 mA 24 V DC
IP degree of protectionIP20
Communication serviceBandwidth management Data Editor (via PC terminal) FDR server Rack Viewer SNMP network administrator Global Data I/O scanning Modbus TCP messaging Web server configurable
Relative humidity10...95 % without condensation
StandardsIEC 61131-2 IEC 61010-2-201 UL 61010-2-201 CSA C22.2 No 61010-2-201 IACS E10 IEC 61000-6-5, interface type 1 and type 2 IEC 61850-3, location G IEC 60079-0
SupplyInternal power supply via rack
ConceptTransparent Ready
MarkingCE

All specifications

BMXNOE0100H additional specifications
ParameterValue
CategoryUS1PC3418160
Directives2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive
Memory usageApplication saving Activating the standard web server
Module formatStandard
Port ethernet10BASE-T/100BASE-TX
Local signalling1 LED (green) for activity on Ethernet network (ETH ACT) 1 LED (green) for processor running (RUN) 1 LED (green) for status of Ethernet network (ETH STS) 1 LED (red) for data rate (ETH 100) 1 LED (red) for memory card fault (CARD ERR) 1 LED (red) for processor or system fault (ERR)
Memory descriptionSupplied Flash memory card (BMXRWSC016M)
Protective treatmentConformal coating
Environmental characteristicGas resistant class Gx ISA S71.04 Gas resistant class 3C4 IEC 60721-3-3 Dust resistant class 3S4 IEC 60721-3-3 Sand resistant class 3S4 IEC 60721-3-3 Salt resistant level 2 IEC 68252 Mold growth resistant class 3B2 IEC 60721-3-3 Fungal spore resistant class 3B2 IEC 60721-3-3 Hazardous location class I division 2
Product specific applicationFor severe environments
Ambient air temperature for operation-13...158 °F (-25...70 °C)

Product details

The BMXNOE0100H is a Modicon M340 Ethernet TCP/IP network module with a single RJ45 port operating at 10 or 100 Mbit/s. It draws 90 mA at 24 V DC from the rack backplane — no additional supply wiring. The module sits in a standard format slot and power it up to check the four green and two red LEDs: ETH ACT, RUN, ETH STS, and ETH 100 indicate network activity, processor running, network status, and data rate; CARD ERR and ERR flag memory card or system faults. What are the defaults out of the box? The module ships with a supplied Flash memory card (BMXRWSC016M) for application storage. It supports Modbus TCP messaging, I/O scanning, Global Data, SNMP, FDR server, and the Rack Viewer — so it handles the usual transparent ready class B30 requirements without extra configuration.

Compliance and environmental fit for severe locations

This module carries a long list of standards — IEC 61131-2, UL 61010-2-201, CSA C22.2 No 61010-2-201, ATEX (2014/34/EU), and importantly IEC 61850-3 for substation environments and IEC 61000-6-5 for power plant EMC. The conformal coating and environmental ratings (gas class Gx/3C4, dust 3S4, salt level 2) mean it is built for severe locations. For commissioning, the IP20 rating means it is for enclosure use only; no open-panel mounting.

Frequently asked questions

How is the BMXNOE0100H powered?

It draws internal power from the rack backplane at 90 mA at 24 V DC — no separate supply connection needed.

What concept does the BMXNOE0100H use?

The module is part of Schneider Electric's Transparent Ready concept, class B30, which means it is ready for web-based diagnostics and standard Ethernet services.

What compliance documentation is available for the BMXNOE0100H?

It carries CE marking and complies with low voltage directive 2014/35/EU, EMC directive 2014/30/EU, and ATEX directive 2014/34/EU. Standards include IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No 61010-2-201, IACS, IEC 61000-6-5, IEC 61850-3, and IEC 60079-0 for hazardous locations.

MPN
BMXNOE0100H