Skip to main content
Log in
Schneider Electric C10V32D100 — Miniature Circuit Breakers (MCB)

Schneider Electric C10V32D100 ComPacT NSX100HB1 Circuit Brea

MPNC10V32D100
Active

Schneider Electric ComPacT NSX, circuit breaker, C10V32D100, 100 A at 40 °C, 85 kA Icu at 500 V AC, 3 poles, MicroLogic 2.2 trip unit.

$8.36Ref. price · indicative, final on quote
Schneider Electric C10V32D100 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

C10V32D100 — Identification
ParameterValue
Product nameComPacT NSX
Product rangeComPacT
Product/component typeCircuit breaker
Device applicationDistribution
C10V32D100 — Ratings
ParameterValue
Rated current (In)100 A at 40 °C
Poles configuration3P
Breaking capacity85 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 80 kA Icu at 525 V AC 50/60 Hz conforming to IEC 60947-2 75 kA Icu at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity (Ics)85 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 80 kA at 525 V AC 50/60 Hz conforming to IEC 60947-2 75 kA at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)690 V AC 50/60 Hz
Rated insulation voltage (Ui)800 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)8 kV
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A
Overvoltage categoryIII
C10V32D100 — Protection
ParameterValue
Trip unit technologyElectronic
Earth-leakage protectionWithout
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)20000 cycles at 440 V In/2 10000 cycles at 440 V In 10000 cycles at 690 V In/2 5000 cycles at 690 V In
Mechanical durability (cycles)20000 cycles
C10V32D100 — Mechanical
ParameterValue
Mounting supportBackplate
Control typeToggle
Local signalling/indicationFlashing LED (green) for ready to operate LED 105 % Ir (red) for overload LED 90 % Ir (orange) for overload
C10V32D100 — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-50...85 °C
IP degree of protectionIP40 conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Relative humidity0...95 %
C10V32D100 — Approvals
ParameterValue
StandardsEN/IEC 60947-2
C10V32D100 — Specifications
ParameterValue
[Ir] long-time protection pick-up adjustment range40...100 A
Trip unit protection functionsLSoI

Product details

The C10V32D100 is a Schneider Electric ComPacT NSX circuit breaker from the NSX100HB1 family, rated 100 A at 40 °C with an electronic MicroLogic 2.2 trip unit. The 3-pole design with front-front connections (upside and downside both front) suits standard backplate mounting in a switchboard or MCC bucket.

Trip unit and protection logic

No earth-leakage protection built in; you add a Vigi module externally if ground-fault detection is required.

IP40 front face keeps tools and fingers out; IK07 impact rating handles accidental hammer knocks during installation.

Mechanical durability is 20,000 cycles; electrical durability varies with load: 20,000 cycles at 440 V In/2, 10,000 cycles at 440 V In, 10,000 cycles at 690 V In/2, and 5,000 cycles at 690 V In. Overvoltage category III and utilisation category A cover distribution-level switching, not motor starting (that would need a category B or motor-protective breaker).

Frequently asked questions

Where can I buy C10V32D100 and how do I get a price?

C10V32D100 is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm price and lead time.

What is C10V32D100's breaking capacity at 500 V AC?

The breaking capacity is 85 kA Icu at 500 V AC 50/60 Hz conforming to EN/IEC 60947-2.

What trip unit does C10V32D100 use?

It uses a MicroLogic 2.2 electronic trip unit with L (long-time overload), So (short-time short-circuit with fixed delay), and I (instantaneous short-circuit) protection.

MPN
C10V32D100