Skip to main content
Log in
Schneider Electric C10V3MA050 — Miniature Circuit Breakers (MCB)

C10V3MA050 ComPacT NSX circuit breaker, 50 A, 85 kA Icu, mag

MPNC10V3MA050
Active

Schneider Electric ComPacT NSX, circuit breaker, 3P, 50 A, MA magnetic-only trip unit, 85 kA Icu at 500 V AC, EN/IEC 60947-2.

$6.53Ref. price · indicative, final on quote
Schneider Electric C10V3MA050 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

C10V3MA050 — Identification
ParameterValue
Product nameComPacT NSX
Product rangeComPacT
Product/component typeCircuit breaker
Device applicationMotor protection
C10V3MA050 — Ratings
ParameterValue
Rated current (In)50 A at 65 °C
Poles configuration3P
Breaking capacity85 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 80 kA Icu at 525 V AC 50/60 Hz conforming to IEC 60947-2 75 kA Icu at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity (Ics)85 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 80 kA at 525 V AC 50/60 Hz conforming to IEC 60947-2 75 kA at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)690 V AC 50/60 Hz
Rated insulation voltage (Ui)800 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)8 kV
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A
Overvoltage categoryIII
C10V3MA050 — Protection
ParameterValue
Trip unit technologyMagnetic
Earth-leakage protectionWithout
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)20000 cycles at 440 V In/2 10000 cycles at 440 V In 10000 cycles at 690 V In/2 5000 cycles at 690 V In
Mechanical durability (cycles)20000 cycles
C10V3MA050 — Mechanical
ParameterValue
Mounting supportBackplate
Control typeToggle
C10V3MA050 — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-50...85 °C
IP degree of protectionIP40 conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Relative humidity0...95 %
C10V3MA050 — Approvals
ParameterValue
StandardsEN/IEC 60947-2
C10V3MA050 — Specifications
ParameterValue
Trip unit protection functionsI

Product details

It is a 3-pole device (3P) built to EN/IEC 60947-2, intended for motor protection where only short-circuit (magnetic) protection is required — no thermal overload element. The MA trip unit responds to fault currents only; motor overload protection is handled separately by a thermal relay or motor protection relay in the circuit.

Breaking capacity and isolation

Rated breaking capacity reaches 85 kA Icu at 500 V AC 50/60 Hz, 80 kA Icu at 525 V AC, and 75 kA Icu at 660/690 V AC — the HB1 breaking capacity code.

Mounts on a backplate — flat on the back, horizontal or vertical orientation accepted. The front connection (upside and downside) uses a 35 mm connection pitch. IP40 enclosure protection keeps out tools and particles >1 mm; IK07 impact resistance handles a 2 J drop. Operating altitude derating begins above 2000 m.

No earth-leakage protection built in (no Vigi module). Relative humidity range 0–95 %. The toggle control is manual; no auxiliary contacts or shunt trip are included in this base variant.

Frequently asked questions

Where can I buy C10V3MA050 and how do I get a price?

Sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm price and lead-time estimate.

What is the closest alternative to C10V3MA050 in the ComPacT NSX family?

A direct sibling is the C10V3MA050 with the same 50 A MA trip unit and 3P construction. The key difference among ComPacT NSX variants is the trip unit type: MA (magnetic-only for motor protection) versus TM (thermal-magnetic for general distribution). If the application requires thermal overload protection, a TM trip unit variant would be the alternative, but it would change the protection characteristic.

What compliance documentation does the brand provide for C10V3MA050?

The breaker is certified to EN/IEC 60947-2 and carries suitability for isolation marking per that standard. IP40 and IK07 ratings are per IEC 60529 and IEC 62262 respectively. Pollution degree 3 per IEC 60664-1. The brand provides a Declaration of Performance and CE declaration on request.

What is the breaking capacity of C10V3MA050 at 690 V?

75 kA Icu at 660/690 V AC 50/60 Hz, per IEC 60947-2. This is the HB1 breaking capacity code.

MPN
C10V3MA050