Skip to main content
Log in
Schneider Electric C11F6TM016B — Miniature Circuit Breakers (MCB)

Schneider Electric C11F6TM016B ComPacT NSXm MCB, 16 A, 4P, 3

MPNC11F6TM016B
Active

Schneider Electric ComPacT NSXm, circuit breaker, 16 A, 4P, 36 kA at 415 V AC, thermal-magnetic TM-D trip unit, EN/IEC 60947-2, IP40, grey (RAL 7016).

Schneider Electric C11F6TM016B datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

C11F6TM016B — Identification
ParameterValue
Product nameComPacT NSXm
Product rangeComPacT
Product/component typeCircuit breaker
Device applicationDistribution
C11F6TM016B — Ratings
ParameterValue
Rated current (In)16 A at 40 °C
Poles configuration4P
Rated operational voltage (Ue)690 V AC 50/60 Hz
Rated insulation voltage (Ui)800 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)8 kV
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A
Overvoltage categoryIII
C11F6TM016B — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Earth-leakage protectionWithout
Suitability for isolationYes conforming to IEC 60947-2
Electrical durability (cycles)20000 cycles at 440 V In/2 10000 cycles at 440 V In 10000 cycles at 690 V In/2 5000 cycles at 690 V In
Mechanical durability (cycles)20000 cycles
C11F6TM016B — Mechanical
ParameterValue
Mounting supportBackplate
Control typeToggle
Local signalling/indicationFlag (green) for presence of auxiliary contacts
Number of 9 mm pitches12 module
C11F6TM016B — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-50...85 °C
IP degree of protectionIP40 conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Relative humidity0...95 %
C11F6TM016B — Approvals
ParameterValue
StandardsEN/IEC 60947-2
C11F6TM016B — Electrical
ParameterValue
[Icu] rated ultimate short-circuit breaking capacity85 kA Icu at 220...240 V AC 50/60 Hz conforming to IEC 60947-2 36 kA Icu at 380...415 V AC 50/60 Hz conforming to IEC 60947-2 35 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 15 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 10 kA Icu at 525 V AC 50/60 Hz conforming to IEC 60947-2
[Ics] rated service short-circuit breaking capacity85 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2 36 kA at 380...415 V AC 50/60 Hz conforming to IEC 60947-2 30 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 10 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 10 kA at 525 V AC 50/60 Hz conforming to IEC 60947-2
C11F6TM016B — Specifications
ParameterValue
[Ir] long-time protection pick-up adjustment range0.7...1 x In
Trip unit protection functionsLI

Product details

The C11F6TM016B is a Schneider Electric ComPacT NSXm circuit breaker — a 4-pole, 16 A thermal-magnetic unit rated for distribution duty. The TM-D trip unit handles overload and short-circuit protection in one block, with a breaking capacity of 36 kA at 415 V AC (performance level F). That rating means it can safely interrupt fault currents up to that level without upstream cascading, which matters for panel coordination studies. Rated 16 A at 40 °C, so it's sized for a moderate lighting or small power subfeed. The 4-pole configuration (switched neutral on the left) suits three-phase plus neutral distribution boards where you want common-trip on all poles.

Mounting and integration

Mounts on a backplate — horizontal or vertical, flat against the surface. The 108 mm wide, 137 mm high, 80 mm deep footprint fits standard ComPacT NSXm panel cutouts. IP40 enclosure protection keeps dust out of the panel; IK07 impact rating handles accidental tool drops during maintenance. Pollution degree 3 per IEC 60664-1 means it's rated for industrial environments with conductive pollution — typical for an unsealed panel in a factory.

Frequently asked questions

What are the key ratings of C11F6TM016B?

Rated current 16 A at 40 °C, breaking capacity 36 kA at 415 V AC (performance level F), 4 poles, thermal-magnetic trip unit TM-D, conforming to EN/IEC 60947-2.

What compliance documentation does Schneider provide for C11F6TM016B?

The breaker is certified to EN/IEC 60947-2, carries IP40 and IK07 protection ratings, and is suitable for isolation per the same standard. Specific RoHS/REACH declarations are available on request.

MPN
C11F6TM016B