Skip to main content
Log in
Schneider Electric CR1F265L7 — Contactors

Schneider CR1F265L7 TeSys F Magnetic Latching Contactor, 265

MPNCR1F265L7
Obsolete

Schneider Electric TeSys F magnetic latching contactor, CR1F265L7, 3P (3 NO), 265 A, 208 V AC/DC coil, obsolete.

Schneider Electric CR1F265L7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

CR1F265L7 — Identification
ParameterValue
Product / component typeMagnetic latching contactor
Series / rangeTeSys
ApplicationMotor control Resistive load
CR1F265L7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)1000 V AC 25...200 Hz
Utilisation categoryAC-3 AC-4 AC-1
CR1F265L7 — Contacts & Poles
ParameterValue
Pole configuration3P
CR1F265L7 — Environmental
ParameterValue
Operating altitude9842.52 ft (3000 m) without derating
Protective treatment / pollution degreeTC
CR1F265L7 — Mechanical
ParameterValue
Width7.9 in (201.5 mm)
Height8.0 in (203 mm)
Depth8.4 in (213 mm)

Product details

The CR1F265L7 is a TeSys F magnetic latching contactor from Schneider Electric, a 3-pole (3 NO) device rated for 265 A operational current in AC-3 duty at 40 °C. It's designed for motor control and resistive loads, with a control coil that latches and unlatches on a 208 V AC (50...400 Hz) or 208 V DC supply. The latching mechanism holds the main contacts closed without continuous coil power, which cuts standby consumption and heat in the panel.

The utilisation categories also cover AC-4 (inching/plugging) and AC-1 (resistive), so it's not limited to just one load type.

The contactor measures 8.4 in deep, 7.9 in wide, and 8.0 in tall. Terminals accept lugs, ring terminals, or bars up to 240 mm² per pole. Tightening torque is 35 N.m on the power connections. It's a panel-mount device, not DIN-rail snap-on, so plan for bolt-down installation with clearance for the lug entry.

Frequently asked questions

What is the closest alternative to CR1F265L7 in the TeSys F family?

There is no official successor order code listed. For a replacement, you would need to select a current-production TeSys F contactor with matching pole count, coil voltage, and a rated operational current of at least 265 A in AC-3. Verify the mounting dimensions and terminal arrangement against your panel layout before ordering.

What are the key specifications for CR1F265L7?

It is a 3-pole (3 NO) magnetic latching contactor rated 265 A in AC-3 at 40 °C, with a 208 V AC/DC coil. Rated insulation voltage is 1000 V, and it covers utilisation categories AC-3, AC-4, and AC-1. Physical dimensions are 8.4 x 7.9 x 8.0 inches.

What compliance documentation is available for CR1F265L7?

The evidence does not list specific compliance documents (RoHS, REACH, UL, IEC) for this order code. The rated insulation voltage references IEC 60947-4 and BS 775 standards, suggesting it was designed to those norms. For a specific certificate request, include it in your RFQ.

MPN
CR1F265L7