Schneider Electric TeSys B contactor, CV1BF3F0ZM510, 3 poles, AC-3 80 A at 690 V AC, 220 V AC 50 Hz coil.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | TeSys |
| Application | Motor Resistive circuits, heating, lighting |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | 690 V AC |
| Utilisation category | AC-1 AC-3 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| Device short name | CV1BF |
| Control circuit type | AC |
| Pole contact composition | 3 NO |
| Coil voltage | 220 V AC 50 Hz |
| Auxiliary contact composition | 1 NO |
| [Ie] rated operational current | 80 A AC for power circuit |
| Current rating code of contactor | BF |
The same pole set also carries an AC-1 rating for resistive and heating loads, so it'll handle lighting or heater banks without derating. One auxiliary normally-open contact is built in, enough for a seal-in or a status feedback to a PLC input.
This is a panel-mount contactor, DIN-rail or screw-fixed depending on the mounting accessory you pair it with. The AC coil circuit needs its own suppression (RC snubber) if you're switching it with a PLC output or a solid-state relay.
It is a 3-pole contactor rated 80 A in AC-3 duty at 690 V AC, with a 220 V AC 50 Hz coil. It also carries an AC-1 utilization category for resistive loads, and includes one normally-open auxiliary contact.
The CV1BF3F0ZM510 is part of the TeSys B range, while the LC1D80 is a TeSys D contactor. The CV1BF has a 220 V AC coil and one auxiliary contact; the LC1D80 typically offers a broader range of coil voltages and auxiliary configurations. The CV1BF is a more basic, fixed-coil design compared to the modular TeSys D series.
No related articles