Skip to main content
Log in
Schneider Electric EZS100F3016 — Circuit Breaker Accessories

Schneider Electric EZS100F3016 EasyPact EZS Circuit Breaker,

MPNEZS100F3016
Obsolete

Schneider Electric EasyPact EZS series, EZS100F3016, molded case circuit breaker, 3-pole, 16 A, thermal-magnetic, 60 kA Icu at 240 V AC, IP40, backplate mount.

Schneider Electric EZS100F3016 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

EZS100F3016 — Identification
ParameterValue
Product / component typeCircuit breaker
Range of productEasyPact EZS
EZS100F3016 — Electrical
ParameterValue
Network type (AC/DC)AC
Rated current [In]16 A at 40 °C
Rated operational voltage [Ue]440 V AC 50/60 Hz conforming to EN/IEC 60947-2 400 V AC 50/60 Hz conforming to GB 14048.2
Rated insulation voltage [Ui]690 V conforming to EN/IEC 60947-2
Rated impulse withstand voltage [Uimp]6 kV conforming to EN/IEC 60947-2
Network frequency50/60 Hz
Poles description3P
EZS100F3016 — Protection & Performance
ParameterValue
Breaking capacity60 kA Icu at 220/240 V AC 50/60 Hz conforming to EN/IEC 60947-2 30 kA Icu at 380/400 V AC 50/60 Hz conforming to EN/IEC 60947-2 30 kA Icu at 415 V AC 50/60 Hz conforming to EN/IEC 60947-2 20 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2 65 kA Icu at 200/230 V AC 50/60 Hz conforming to GB 14048.2 35 kA Icu at 380/400 V AC 50/60 Hz conforming to GB 14048.2
Rated service breaking capacity [Ics]30 kA at 220/230 V AC 50/60 Hz conforming to GB 14048.2 17 kA at 380/400 V AC 50/60 Hz conforming to GB 14048.2 30 kA at 220/240 V AC 50/60 Hz conforming to EN/IEC 60947-2 17 kA at 380/400 V AC 50/60 Hz conforming to EN/IEC 60947-2
Breaking capacity codeF
Trip unit technologyThermal-magnetic
Trip unit rating16 A at 40 °C
Trip unit nameTM-D
Protection typeShort-circuit protection (magnetic) Overload protection (thermal)
Suitability for isolationYes
Utilisation categoryCategory A
Mechanical durability13000 cycles conforming to EN/IEC 60947-2 20000 cycles conforming to GB 14048.2
Electrical durability4000 cycles 415 V In/2 conforming to EN/IEC 60947-2 8000 cycles 400 V In conforming to GB 14048.2
EZS100F3016 — Mechanical
ParameterValue
Connection pitch25 mm
Downside connectionFront
Upside connectionFront
Device short nameEZS100F
Control typeToggle
Mounting modeFixed
Mounting supportBackplate
Width75 mm
Height130 mm
Depth60 mm
EZS100F3016 — Environmental
ParameterValue
IP degree of protectionIP40 conforming to IEC 60529
IK degree of protectionIK07 conforming to IEC 62262
Pollution degree3 conforming to IEC 60947-1
Operating ambient air temperature-35...70 °C
Storage ambient air temperature-50...85 °C
EZS100F3016 — Approvals
ParameterValue
StandardsEN 60947-2 IEC 60947-2

Product details

What this breaker brings to a panel

It's a distribution breaker, not a motor-protection device — the fixed thermal pickup at 1× In handles overloads, and the magnetic instantaneous trip clears short circuits. The 60 kA Icu at 240 V AC (30 kA at 400 V AC) gives solid fault-clearing headroom for a 400 V distribution panel without cascading upstream.

At 380/400 V AC (the common 400 V three-phase line in Europe and Asia), it's rated 30 kA Icu — still enough for most low-voltage distribution boards. The GB 14048.2 ratings (65 kA at 200/230 V, 35 kA at 380/400 V) are the Chinese national standard equivalents; both are valid for the same hardware. Category A utilization means it's not intended for selectivity with downstream breakers under short-circuit conditions — coordinate with a current-limiting upstream device if you need discrimination.

Fixed backplate mount, front-front connections (line and load both front-facing). 25 mm connection pitch between poles. The toggle handle gives manual on/off control.

Frequently asked questions

What is the breaking capacity of EZS100F3016 at 400 V?

30 kA Icu at 380/400 V AC 50/60 Hz per EN/IEC 60947-2, and 35 kA Icu at 380/400 V AC per GB 14048.2.

What compliance standards does the EZS100F3016 meet?

It complies with EN 60947-2 and IEC 60947-2 for circuit breakers. The enclosure carries IP40 per IEC 60529 and IK07 impact rating per IEC 62262. Pollution degree 3 per IEC 60947-1.

Where can I buy the EZS100F3016 and get current pricing?

The EZS100F3016 is sourced to order through independent distribution. Submit an RFQ for current pricing and availability — confirmed at quote time.

MPN
EZS100F3016