Schneider Electric GoPact MCCB 125, G12E4F32, 4P, TM-D thermal-magnetic trip, 32 A at 40 °C, 15 kA at 380/415 V AC, screw terminals, IP20, grey (RAL 7035).
| Parameter | Value |
|---|---|
| Product name | GoPact MCCB 125 |
| Product range (series) | GoPact MCCB |
| Product/component type | Circuit breaker |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current (In) | 32 A at 40 °C |
| Poles configuration | 4P |
| Rated operational voltage (Ue) | 415 V AC 50/60 Hz conforming to EN/IEC 60947-2 |
| Rated insulation voltage (Ui) | 440 V AC conforming to EN/IEC 60947-2 |
| Rated impulse withstand voltage (Uimp) | 6 kV conforming to EN/IEC 60947-2 |
| Utilisation category | Category A |
| Overvoltage category | III |
| Parameter | Value |
|---|---|
| Trip unit technology | Thermal-magnetic |
| Suitability for isolation | Yes conforming to EN/IEC 60947-2 |
| Electrical durability (cycles) | 8000 cycles at 415 V In |
| Mechanical durability (cycles) | 30000 cycles |
| Parameter | Value |
|---|---|
| Mounting support | Backplate |
| Control type | Toggle |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -20...55 °C |
| Storage ambient temperature | -35...85 °C |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 60947-1 EN/IEC 60947-2 EN/IEC 60947-2 Annex H |
| Parameter | Value |
|---|---|
| [Icu] rated ultimate short-circuit breaking capacity | 15 kA Icu at 380/415 V AC 50/60 Hz conforming to EN/IEC 60947-2 25 kA Icu at 220/230 V AC 50/60 Hz conforming to EN/IEC 60947-2 |
| [Ics] rated service short-circuit breaking capacity | 15 kA at 380/415 V AC 50/60 Hz conforming to EN/IEC 60947-2 25 kA at 220/230 V AC 50/60 Hz conforming to EN/IEC 60947-2 |
| Parameter | Value |
|---|---|
| [Ir] long-time protection pick-up adjustment range | 1 x In |
| Trip unit protection functions | LI |
The Schneider Electric G12E4F32 is a GoPact MCCB 125 molded-case circuit breaker with a 4-pole (4P) configuration, a TM-D thermal-magnetic trip unit, and a rated current of 32 A at 40 °C. The LI protection curve (L for thermal overload, I for magnetic short-circuit) is the standard two-step response: the thermal element rides through harmless inrush, the magnetic element snaps open on a hard fault.
Connection pitch is 25 mm, which matches common bus-bar spacing.
We supply it through independent distribution. Submit an RFQ for current pricing and lead time — availability is confirmed at quote time.
The performance level is 15 kA at 380/415 V AC, which is the interrupting rating that governs fault-clearing capability.
It complies with EN/IEC 60947-1, EN/IEC 60947-2, and EN/IEC 60947-2 Annex H. It is also certified for isolation per EN/IEC 60947-2.
Within the GoPact MCCB 125 range, any 4P TM-D unit with a different amp rating (e.g., 40 A or 50 A) shares the same frame, footprint, and trip-unit technology — the swap is just the thermal-magnetic calibration.