Skip to main content
Log in
Schneider Electric GV2DM203P7 — Miniature Circuit Breakers (MCB)

TeSys GV2DM203P7 reversing motor starter, 0.25-0.4 A, 230 V

MPNGV2DM203P7
Obsolete

Schneider Electric TeSys Deca reversing motor starter, GV2DM203P7, 0.25-0.4 A thermal protection, 230 V AC 50/60 Hz coil, 3-pole, Type 1 coordination.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2DM203P7 — Identification
ParameterValue
Product range (series)TeSys TeSys Deca
Product/component typeMotor starter
GV2DM203P7 — Ratings
ParameterValue
Poles configuration3P
Utilisation categoryAC-3
GV2DM203P7 — Mechanical
ParameterValue
Width90 mm
Height176.4 mm
Depth99.6 mm
GV2DM203P7 — Other specifications
ParameterValue
Motor power0.09 kW at 400/415 V AC 50/60 Hz 0.09 kW at 440 V AC 50/60 Hz 0.12 kW at 440 V AC 50/60 Hz
Coordination typeType 1
Device short nameGV2DM
Device composition1 3-pole reversing contactor 1 combination block GV2AF3 1 motor circuit breaker type GV2ME
Motor starter typeReversing
Breaking capacityIq 50 kA at 400/415 V conforming to IEC 60947-4-1 Iq 50 kA at 440 V conforming to IEC 60947-4-1 Iq 50 kA at 500 V conforming to IEC 60947-4-1
Magnetic tripping current5 A
Coil voltage230 V AC 50/60 Hz
Thermal protection adjustment range0.25...0.4 A

Product details

The GV2DM203P7 is a reversing motor starter from the TeSys Deca range, combining a 3-pole reversing contactor, a GV2AF3 combination block, and a GV2ME motor circuit breaker in one assembly. It is rated for AC-3 utilisation category, so it is built for switching three-phase induction motors under full load — the standard duty for reversing starters on conveyors, pumps, and small drives. The thermal protection adjustment range of 0.25...0.4 A sets the overload relay to match the motor's full-load current; for a 0.09 kW motor at 400/415 V, that is the correct window. The control circuit runs on 230 V AC 50/60 Hz, and the unit delivers a rated breaking capacity of 50 kA at 400/415 V (IEC 60947-4-1) — meaning it can safely interrupt a fault current up to that level without damaging upstream gear, provided the installation meets Type 1 coordination (the starter may need replacement after a fault, but the feeder breaker stays intact).

The GV2DM203P7 measures 90 mm wide, 176.4 mm high, and 99.6 mm deep. It mounts directly to a DIN rail or panel plate via the TeSys Deca base plate.

Frequently asked questions

Where can I buy GV2DM203P7 and how do I get a price?

We source the GV2DM203P7 to order against an RFQ through our independent distribution network. Submit a request for quote (RFQ) and we will confirm current availability and pricing at that time.

What is the closest pin-compatible alternative to GV2DM203P7 in this component family?

No official pin-compatible successor is listed in the available records. For a functional replacement, you would need to evaluate a current TeSys Deca reversing starter with the same thermal range (0.25-0.4 A) and 230 V AC coil — but the physical footprint and wiring may differ. Contact us with your application details for a cross-reference recommendation.

What is GV2DM203P7's listed depth (99.6 mm) on this component line?

The GV2DM203P7 has a depth of 99.6 mm, a width of 90 mm, and a height of 176.4 mm.

MPN
GV2DM203P7