The GV2DP204F7 is a reversing motor starter from the TeSys Deca range — a factory-assembled combination of a GV2P motor circuit breaker and a 3-pole reversing contactor on a GV2AF3 mounting base. It is rated for AC-3 duty (squirrel-cage motor switching) with a thermal protection adjustment range of 0.4 to 0.63 A, making it suitable for small motors in the 0.12 to 0.18 kW range at 400/415 V or 440 V AC. The control circuit runs on 110 V AC 50/60 Hz, and the unit delivers a rated breaking capacity of 130 kA at 400/415 V, 440 V, and 500 V per IEC 60947-4-1 — meaning it can safely interrupt fault currents up to that level without upstream damage, provided the installation is coordinated as Type 2.
The 0.4 to 0.63 A thermal adjustment range sets the motor full-load current the overload relay protects — set the dial to match the motor nameplate FLA. The magnetic trip is fixed at 8 A, so it clears short-circuits without nuisance tripping on motor inrush. The 130 kA breaking capacity at 400/415 V means this starter can be installed on a high-fault-capacity supply (typical of industrial distribution) without requiring a separate upstream current-limiting device, as long as the coordination study confirms Type 2. Dimensions are 90 mm wide, 176.4 mm high, and 105.6 mm deep — a standard TeSys Deca footprint that fits DIN-rail or panel-mount enclosures. The reversing contactor pair occupies the same width as a non-reversing starter, so panel layout stays consistent when swapping between forward-only and reversing configurations.