The GV2ME06K1P7 is a non-reversing DOL combination starter from the TeSys GV2-ME line, integrating a motor circuit breaker and a 3-pole contactor in one block with the GV2AF01 auxiliary contact block. The thermal protection adjustment range of 1...1.6 A is the primary selection parameter — it sets the motor full-load current window the overload relay protects against. For a 0.37 kW motor at 400/415 V AC, that window lands correctly; the same block also covers 0.55 kW at 440 V and 0.75 kW at 500 V, per the motor power table. Rated AC-3 (AC-3) utilization category, so it is designed for starting squirrel-cage induction motors — switching under load during start, not for resistive heating banks. The magnetic tripping current is set at 22.5 A, which clears short-circuit faults fast without waiting for the thermal bimetal to respond. Breaking capacity is 50 kA Iq at 400/415 V AC conforming to IEC 60947-4-1, meaning the combination starter can safely interrupt a fault current up to 50 kA at those voltages without welding contacts or rupturing the enclosure. That is a high-fault rating for this frame size — suitable for installations with substantial transformer capacity or stiff utility feeds. Coordination type is Type 1, per IEC 60947-4-1. Under a short-circuit, the contactor may need replacement after the fault, but the starter remains serviceable. For applications requiring no-contact replacement after a fault, Type 2 coordination would be specified instead.
Mounts on a DIN rail. The 45 mm width (45 mm) and 152 mm height (152 mm) fit a standard modular enclosure grid; depth of 87 mm (87 mm) means it clears most shallow backboxes, but check gland-plate clearance if the panel is less than 100 mm deep. The control circuit voltage is 230 V AC 50/60 Hz (230 V AC 50/60 Hz) — the coil pulls in at that nominal; verify the control transformer secondary matches before wiring. The device composition includes the GV2AF01 auxiliary contact block as a factory-integrated element. No separate auxiliary purchase needed for basic interlocking.
Product status is Active (Active). This is a current-production catalog item, not a phase-out or last-time-buy. The TeSys GV2-ME series is a mature, widely stocked line — no PCN risk in the near term.