The Schneider Electric GV2ME06K2Q7 is a DOL reversing combination motor starter from the TeSys GV2-ME range. It integrates a motor circuit breaker, a 3-pole reversing contactor, and a combination block (GV2AF01) into one pre-wired unit — a single order code that replaces three separate components on the BOM. Thermal protection adjusts from 1 to 1.6 A, so it's sized for small three-phase motors — think fractional-horsepower conveyors, fan coils, or pump drives. The magnetic trip is fixed at 22.5 A, which clears short-circuit faults fast without nuisance tripping on inrush. Rated for AC-3 utilisation category, meaning it's built for starting and stopping squirrel-cage induction motors under load — not just resistive switching. The 50 kA breaking capacity at 400/415 V AC (IEC 60947-4-1) means it safely interrupts fault currents up to that level without upstream fuses needing to clear first, as long as Type 1 coordination is acceptable.
The 45 mm wide footprint clips onto standard DIN rail. At 152 mm tall and 87 mm deep, it leaves room above for a control transformer or PLC output card. The reversing contactor is mechanically interlocked inside the assembly, so there's no risk of phase-to-phase short when the direction changes. Motor power output varies by supply voltage: 0.37 kW at 400 V, 0.55 kW at 440 V, and up to 0.75 kW at 500 V.
It is a current-production TeSys GV2-ME variant.