Schneider Electric TeSys GV2-ME GV2ME07K1BW3 DOL combination starter, 750 W, 24 V DC coil, 3-pole, 50 kA breaking capacity, AC-3/AC-3e, Type 1 coordination.
| Parameter | Value |
|---|---|
| Product range | TeSys |
| Product/component type | Motor starter |
| Parameter | Value |
|---|---|
| Poles configuration | 3P |
| Breaking capacity | 50 kA Iq at 400/415 V AC 50/60 Hz conforming to IEC 60947-4-1 50 kA Iq at 440 V AC 50/60 Hz conforming to IEC 60947-4-1 50 kA Iq at 500 V AC 50/60 Hz conforming to IEC 60947-4-1 |
| Utilisation category | AC-3 AC-3e |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 152 mm |
| Depth | 87 mm |
| Parameter | Value |
|---|---|
| Motor power | 0.75 kW at 400/415 V AC 50/60 Hz 0.75 kW at 440 V AC 50/60 Hz 1.1 kW at 440 V AC 50/60 Hz 1.1 kW at 500 V AC 50/60 Hz |
| Coordination type | Type 1 |
| Device short name | GV2ME |
| Device composition | 1 3-pole contactor 1 motor circuit breaker type GV2ME 1 combination block GV2AF01 |
| Motor starter type | Non reversing |
| Magnetic tripping current | 33.5 A |
| Coil voltage | 24 V DC |
| Thermal protection adjustment range | 1.6...2.5 A |
The GV2ME07K1FE7 shares the same 750 W motor rating, 3-pole construction, and 50 kA breaking capacity, but uses a 115 V AC coil instead of 24 V DC. If your panel already runs a 24 V DC control bus, the GV2ME07K1BW3 drops in without an additional power supply; the GV2ME07K1FE7 requires a separate 115 V AC source or a transformer.
Schneider lists the GV2ME07K1BW3 as active production.
No related articles