Schneider Electric TeSys K GV2ME07K2BW3 DOL reversing combination starter, 3-pole, 750 W, 24 V DC coil, AC-3/AC-3e utilization, 50 kA breaking capacity, Type 1 coordination.
| Parameter | Value |
|---|---|
| Product range | TeSys |
| Product/component type | Motor starter |
| Parameter | Value |
|---|---|
| Poles configuration | 3P |
| Breaking capacity | 50 kA Iq at 400/415 V AC 50/60 Hz conforming to IEC 60947-4-1 50 kA Iq at 440 V AC 50/60 Hz conforming to IEC 60947-4-1 50 kA Iq at 500 V AC 50/60 Hz conforming to IEC 60947-4-1 |
| Utilisation category | AC-3 AC-3e |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 152 mm |
| Depth | 87 mm |
| Parameter | Value |
|---|---|
| Motor power | 0.75 kW at 400/415 V AC 50/60 Hz 0.75 kW at 440 V AC 50/60 Hz 1.1 kW at 440 V AC 50/60 Hz 1.1 kW at 500 V AC 50/60 Hz |
| Coordination type | Type 1 |
| Device short name | GV2ME |
| Device composition | 1 combination block GV2AF01 1 3-pole reversing contactor 1 motor circuit breaker type GV2ME |
| Motor starter type | Reversing |
| Magnetic tripping current | 33.5 A |
| Coil voltage | 24 V DC |
| Thermal protection adjustment range | 1.6...2.5 A |
Breaking capacity sits at 50 kA under Type 1 coordination, and the unit fits a 45 mm wide footprint on the DIN rail.
The GV2ME07K2BW3 runs on 24 V DC; if your control circuit uses 110 V AC, the GV2ME07K2F7 is the same reversing starter with a 110 V AC coil and AC-3 utilization only.
Schneider lists the GV2ME07K2BW3 as active; no end-of-life notice applies, and it is available through standard distribution channels.
No related articles