The Schneider TeSys GV2ME07K2V7 is a DOL reversing combination starter — a single assembly that bundles a motor circuit breaker (type GV2ME), a 3-pole reversing contactor, and a GV2AF01 combination block into one package. It is rated for AC-3 utilisation category (switching squirrel-cage motors), with a thermal protection adjustment range of 1.6...2.5 A and a magnetic trip threshold of 33.5 A. The 50 kA breaking capacity at 400/415 V AC (IEC 60947-4-1) means it can safely interrupt fault currents up to that level without upstream fuses needing to clear — a Type 1 coordination rating, so the starter may need contact replacement after a fault but the panel stays intact.
The unit measures 45 mm wide, 152 mm high, and 87 mm deep — a standard DIN-rail footprint that clips into a control panel enclosure. The 400 V AC control circuit voltage matches common European line voltages; the 3-pole design handles three-phase motor loads up to 0.75 kW at 400/415 V or 1.1 kW at 440/500 V. For a reversing application (e.g., conveyor direction change or actuator open/close), this single assembly replaces two separate contactors plus a thermal overload relay, saving panel space and wiring time.