Skip to main content
Log in
Schneider Electric GV2ME14AN11TQ — Miniature Circuit Breakers (MCB)

Schneider GV2ME14AN11TQ Motor Circuit Breaker, 10 A, 3P

MPNGV2ME14AN11TQ
Obsolete

Schneider Electric TeSys GV2 motor circuit breaker, GV2ME14AN11TQ, 3-pole, 10 A rated current, thermal-magnetic protection, 100 kA breaking capacity at 400 V AC.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2ME14AN11TQ — Identification
ParameterValue
Product nameTeSys GV2
Product rangeTeSys Deca
Product/component typeMotor circuit breaker
Device applicationMotor protection
GV2ME14AN11TQ — Ratings
ParameterValue
Rated current (In)10 A
Poles configuration3P
Breaking capacity100 kA Icu at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 15 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 3 kA Icu at 690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)600 V AC 50/60 Hz conforming to UL 508 690 V AC 50/60 Hz conforming to IEC 60947-2 600 V AC 50/60 Hz conforming to CSA C22.2 No 14
Rated insulation voltage (Ui)690 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Network type (AC/DC)AC
Network frequency50/60 Hz conforming to IEC 60947-2
Utilisation categoryCategory A conforming to IEC 60947-2 AC-3 conforming to IEC 60947-4-1 AC-3e conforming to IEC 60947-4-1
GV2ME14AN11TQ — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Suitability for isolationYes conforming to IEC 60947-1
Electrical durability (cycles)100000 cycles for AC-3 at 415 V In 100000 cycles for AC-3e at 415 V In
Mechanical durability (cycles)100000 cycles
GV2ME14AN11TQ — Mechanical
ParameterValue
Control typePush-button
Terminal connection typePower circuit: screw clamp terminal 2 cable(s) 1...6 mm²solid Power circuit: screw clamp terminal 2 cable(s) 1.5...6 mm²flexible without cable end Power circuit: screw clamp terminal 2 cable(s) 1...4 mm²flexible with cable end
Terminal tightening torque1.7 N.m - on screw clamp terminal
Width54 mm
Height89 mm
Depth78.5 mm
GV2ME14AN11TQ — Environmental
ParameterValue
Operating ambient temperature-20...40 °C in enclosure -20...60 °C open mounted
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529 (open mounted)
GV2ME14AN11TQ — Approvals
ParameterValue
StandardsEN/IEC 60947-2 EN/IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 IEC/EN 60335-2-40:Annex JJ IEC/EN 60335-1:Clause 30.2
GV2ME14AN11TQ — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 440 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 500 V AC 50/60 Hz conforming to IEC 60947-2 75 % at 690 V AC 50/60 Hz conforming to IEC 60947-2

Product details

It's sized for motor protection duties: 3 kW at 400/415 V AC, up to 7.5 kW at 690 V AC. Phase failure sensitivity is built in per IEC 60947-4-1, so it will trip if one phase drops out on a three-phase motor — preventing single-phasing damage. The magnetic trip threshold is set at 149 A, which is about 15x the rated current, giving good inrush headroom for standard induction motors.

Dimensions are 89 mm high, 54 mm wide, 78.5 mm deep — fits a standard 4-module wide DIN-rail footprint. Screw-clamp terminals accept up to 2 x 6 mm² solid or 2 x 4 mm² flexible with ferrule; tighten to 1.7 N·m. The auxiliary contact block is integrated as 1 NO + 1 NC side-mounted, so you get status feedback without an add-on module.

Fire resistance is tested to 960 °C per IEC 60695-2-11. Climatic withstand conforms to IACS (marine environment corrosion resistance). Operating altitude is limited to 2000 m without derating.

Frequently asked questions

What are the key ratings for this motor circuit breaker?

Rated current is 10 A, 3-pole, thermal-magnetic trip. Breaking capacity is 100 kA at 400/415 V AC. Motor power ratings range from 3 kW at 400 V up to 7.5 kW at 690 V. Magnetic trip threshold is 149 A.

What compliance certifications does this part carry?

It is certified to EN/IEC 60947-2, EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and meets IEC/EN 60335-2-40 and IEC/EN 60335-1 Clause 30.2 for appliance applications.

What is the mounting method and physical size?

Mounts on 35 mm DIN rail (clipped) or panel (with adaptor plate). Dimensions: 89 mm high, 54 mm wide, 78.5 mm deep. IP20 protection when open mounted.

MPN
GV2ME14AN11TQ