The GV2ME14K1F7 is a non-reversing DOL combination motor starter from the TeSys GV2-ME range, built as a single block that pairs a 3-pole motor circuit breaker with a 3-pole contactor and the GV2AF01 combination block. It covers motor protection from 6 to 10 A via the adjustable thermal relay, and the magnetic trip is fixed at 138 A — so it catches a locked-rotor condition on a motor sized within that band without nuisance-tripping on startup inrush. Rated for AC-3 utilisation category, meaning it is designed for switching squirrel-cage induction motors — starting, stopping, and reversing under load. The motor power rating hits 3 kW at 400/415 V AC and goes up to 5.5 kW at 500 V AC, so it fits common European 400 V line-fed pumps, fans, and small conveyors.
At 440 V it drops to 15 kA, and at 500 V to 6 kA, so on a 480 V line (common in North American retrofit) you need to verify the available fault current at the panel.
Panel fit and sourcing
Dimensions are 152 mm high, 45 mm wide, 87 mm deep — the 45 mm width is a single modular DIN space, so it clips onto standard 35 mm DIN rail inside a control cabinet. The control circuit runs on 110 V AC 50/60 Hz, which matches common panel control transformers in European and Middle East installations; if your site runs 24 V DC or 230 V control, you need a different coil variant in the GV2ME family.