The GV2ME14K1V7 is a non-reversing DOL combination motor starter from the TeSys GV2-ME range, integrating a 3-pole motor circuit breaker (type GV2ME) and a 3-pole contactor into one block with a GV2AF01 auxiliary contact block. The thermal protection adjustment range of 6 to 10 A sets the overload trip point for the connected motor. The magnetic trip is fixed at 138 A, which clears short-circuit faults without nuisance tripping on normal motor starting inrush. Coordination is Type 1, meaning after a fault the starter may need contact replacement but the enclosure and bus remain serviceable.
The GV2ME14K1V7 is obsolete.
Width of 45 mm on the DIN rail means it occupies a single modular slot in a standard enclosure. Height of 152 mm and depth of 87 mm are within the envelope of a typical motor control centre bucket or wall-mounted panel. The combination block format — breaker and contactor in one unit — reduces wiring compared to separate components. The GV2AF01 auxiliary block adds status feedback for the PLC or HMI.