Skip to main content
Log in
Schneider Electric ILA2P571PB1F0

Schneider ILA2P571PB1F0 Lexium integrated drive, 48 V, 0.44 N·m, active

MPNILA2P571PB1F0
Obsolete

Schneider ILA2P571PB1F0 Lexium Ila, Ile, Ils — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$4,509.55Ref. price · indicative, final on quote
Schneider Electric ILA2P571PB1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILA2P571PB1F0 key specifications
ParameterValue
Motor typeAC Synchronous Servo Motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeSingle turn encoder
Gear box typeWithout
Protection typeOverload of output voltage Safe torque off Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILA2P571PB1F0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous 7000 mA peak
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power10 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet Powerlink, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Product weight3.09 lb(US) (1.4 kg)
Centring collar depth0.06 in (1.6 mm)
StandardsIEC 60072-1 EN/IEC 61800-3 EN 50347 EN/IEC 50178 IEC 61800-3, Ed 2 EN 61800-3:2001, second environment EN 61800-3 : 2001-02
Length7.5 in (190.8 mm)
MarkingCE
Category18288 - LEXIUM INTEGRATED DRIVES II
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (20 mm)
Holding brakeWith
Nominal speed3200 rpm 24 V 5100 rpm 48 V
Rotor inertia0.165 kg.cm²
Accuracy error+/- 0.05 °
Holding torque10.6 lbf.in (1.2 N.m) holding brake
Nominal torque3.89 lbf.in (0.44 N.m)
Shaft diameter0.4 in (9 mm)
Device short nameILA
Motor flange size2.2 in (57 mm)
Peak stall torque5.49 lbf.in (0.62 N.m)
Transmission rate100 Mbits
Brake release time14 ms
Service life in hours20000 h bearing
Associated fuse rating16 A
Brake application time13 ms
Maximum axial force fa104 N force pressure) 104 N tensile force)
Number of motor stacks1
Continuous stall torque3.89 lbf.in (0.44 N.m)
Maximum radial force fr89 N
Centring collar diameter2.0 in (50 mm)
Speed feedback resolution16384 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILA2P571PB1F0 is a Schneider Lexium ILA integrated drive combining an AC synchronous servo motor and drive electronics in one 57 mm frame. It delivers 0.44 N·m continuous torque at 48 V DC, with a 6-pole winding rated for medium speed and medium torque. The unit includes a holding brake, single-turn encoder feedback, and on-board Ethernet Powerlink. It is in active production.

Schneider lists the ILA2P571PB1F0 as an active, current-production part. For BOM-freeze or line-down requirements, an RFQ is the fastest path to confirm lead time and available quantity.

MPN
ILA2P571PB1F0