Skip to main content
Log in
Schneider Electric ILA2P572TB1F0

Schneider ILA2P572TB1F0 Lexium ILA Integrated Drive, 24 V DC, 0.57 Nm

MPNILA2P572TB1F0
Obsolete

Schneider Lexium ILA integrated drive, order code ILA2P572TB1F0, AC synchronous servo motor, 6-pole, single-phase 24 V DC, 0.57 Nm torque, IP41, flange mount, with holding brake, single-turn encoder, RS485 Modbus TCP, Ethernet Powerlink, CE.

$4,600.28Ref. price · indicative, final on quote
Schneider Electric ILA2P572TB1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILA2P572TB1F0 key specifications
ParameterValue
Motor typeAC Synchronous Servo Motor
Network typeDC
Winding typeHigh speed of rotation and medium torque
Feedback typeSingle turn encoder
Gear box typeWithout
Protection typeOverload of output voltage Safe torque off Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILA2P572TB1F0 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7500 mA maximum continuous 9000 mA peak
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power10 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet Powerlink, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsIEC 60072-1 EN 61800-3 : 2001-02 EN 50347 EN/IEC 61800-3 EN 61800-3:2001, second environment IEC 61800-3, Ed 2 EN/IEC 50178
Length8.2 in (209.3 mm)
MarkingCE
Category18288 - LEXIUM INTEGRATED DRIVES II
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (20 mm)
Holding brakeWith
Nominal speed3000 rpm 24 V 5100 rpm 48 V
Rotor inertia0.243 kg.cm²
Accuracy error+/- 0.05 °
Holding torque10.6 lbf.in (1.2 N.m) holding brake
Nominal torque5.04 lbf.in (0.57 N.m)
Shaft diameter0.4 in (9 mm)
Device short nameILA
Motor flange size2.2 in (57 mm)
Peak stall torque7.52 lbf.in (0.85 N.m)
Transmission rate100 Mbits
Brake release time14 ms
Service life in hours20000 h bearing
Associated fuse rating16 A
Brake application time13 ms
Maximum axial force fa104 N force pressure) 104 N tensile force)
Number of motor stacks2
Continuous stall torque5.04 lbf.in (0.57 N.m)
Maximum radial force fr107 N
Centring collar diameter2.0 in (50 mm)
Speed feedback resolution16384 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILA2P572TB1F0 is a Schneider Lexium ILA integrated drive combining an AC synchronous servo motor and drive electronics in a single 57 mm frame unit. It is a 6-pole, single-phase design rated for 24 V DC supply, delivering 0.57 Nm continuous torque with a holding brake, IP41 enclosure, and flange mounting. The drive integrates Ethernet Powerlink and RS485 Modbus TCP communication, a single-turn encoder for feedback, and includes protection against output overload, short circuit, and safe torque off.

The ILA2P572TB1F0 operates as a self-contained servo axis: the motor and drive share a common housing, eliminating separate cabling and panel space for a drive unit. The holding brake engages at power-off and releases within 14 ms, suitable for vertical load holding without external brake resistors. Feedback comes from a single-turn encoder providing 16384 points per turn, adequate for positioning tasks in packaging or pick-and-place cells. Communication is via Ethernet Powerlink at 100 Mbits for real-time motion control, with an RS485 Modbus TCP port for configuration and slower data exchange at 9.6, 19.2, or 38.4 kbaud. Protection circuits cover output overvoltage, short circuit, and safe torque off (STO), meeting EN/IEC 61800-3 for EMC in second-environment industrial installations. The drive is naturally convection cooled, rated IP41, and operates at altitudes up to 3280.84 m.

Applications

Lexium ILA integrated drives like the ILA2P572TB1F0 are specified for compact motion axes in packaging machinery, material handling conveyors, assembly stations, and labeling systems where space is constrained and a single-cable servo solution reduces wiring complexity.

Within Schneider's Lexium ILA family, the ILA2P572TB1F0 occupies a mid-torque position at 0.57 Nm on a 57 mm frame, running on 24 V DC. It targets OEMs and integrators who need a holding brake and Ethernet Powerlink networking in a low-voltage servo axis, avoiding the higher voltage (48 V) variants for applications where 24 V is the plant standard.

No obsolescence notice is recorded for the ILA2P572TB1F0; it remains in active production. Standard lead times apply through the RFQ process.

MPN
ILA2P572TB1F0