Skip to main content
Log in
Schneider Electric ILA2T572PB1A0

Schneider ILA2T572PB1A0 Lexium integrated drive, 0.78 N.m, 24 V, Modbus TCP

MPNILA2T572PB1A0
Obsolete

Schneider ILA2T572PB1A0 — now discontinued, supplied from remaining surplus and broker stock.

$2,575.00Ref. price · indicative, final on quote
Schneider Electric ILA2T572PB1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILA2T572PB1A0 key specifications
ParameterValue
Motor typeAC Synchronous Servo Motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeSingle turn encoder
Gear box typeWithout
Protection typeSafe torque off Overload of output voltage Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILA2T572PB1A0 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7000 mA maximum continuous 8500 mA peak
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceModbus TCP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsEN 61800-3:2001, second environment EN 61800-3 : 2001-02 IEC 60072-1 EN 50347 IEC 61800-3, Ed 2 EN/IEC 50178 EN/IEC 61800-3
Length6.4 in (163.8 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (20 mm)
Holding brakeWithout
Nominal speed1600 rpm 24 V 3400 rpm 48 V
Rotor inertia0.173 kg.cm²
Accuracy error+/- 0.05 °
Nominal torque6.90 lbf.in (0.78 N.m)
Shaft diameter0.4 in (9 mm)
Device short nameILA
Motor flange size2.2 in (57 mm)
Peak stall torque14.34 lbf.in (1.62 N.m)
Transmission rate10, 100 Mbits
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa104 N force pressure) 104 N tensile force)
Number of motor stacks2
Continuous stall torque6.90 lbf.in (0.78 N.m)
Maximum radial force fr107 N
Centring collar diameter2.0 in (50 mm)
Speed feedback resolution16384 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

It carries a single-turn encoder resolving 16384 points per turn, communicates via Modbus TCP and RS485, and is protected to IP41 at the shaft bushing and IP54 overall. Rated for 150 m/s² shock per EN/IEC 60068-2-29, it suits applications with moderate mechanical stress.

Compared to the BRS368H131ACA, the ILA2T572PB1A0 delivers lower torque (0.78 N.m vs 1.5 N.m) but higher encoder resolution (16384 vs 10000 points/turn), making it a better fit for precision positioning at lighter loads.

MPN
ILA2T572PB1A0