Skip to main content
Schneider Electric ILA2T572TB1F0

Schneider ILA2T572TB1F0 Lexium Integrated Drive, 6-pole, 48 V, with brake

MPNILA2T572TB1F0
Active

Schneider ILA2T572TB1F0 Square D Servo Motor — now discontinued, supplied from remaining surplus and broker stock.

$2,305.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILA2T572TB1F0 key specifications
ParameterValue
Motor typeAC Synchronous Servo Motor
Network typeDC
Winding typeHigh speed of rotation and medium torque
Feedback typeSingle turn encoder
Gear box typeWithout
Protection typeShort circuit of the output voltage Safe torque off Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILA2T572TB1F0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7500 mA maximum continuous 9000 mA peak
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power10 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceModbus TCP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsIEC 61800-3, Ed 2 IEC 61800-3 IEC 50178 IEC 50347 IEC 60072-1 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment
Length8.2 in (209.3 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (20 mm)
Holding brakeWith
Nominal speed3000 rpm 24 V 5100 rpm 48 V
Rotor inertia0.243 kg.cm²
Accuracy error+/- 0.05 °
Holding torque10.6 lbf.in (1.2 N.m) holding brake
Nominal torque5.04 lbf.in (0.57 N.m)
Shaft diameter0.4 in (9 mm)
Device short nameILA
Motor flange size2.2 in (57 mm)
Peak stall torque7.52 lbf.in (0.85 N.m)
Transmission rate10, 100 Mbits
Brake release time14 ms
Service life in hours20000 h bearing
Associated fuse rating16 A
Brake application time13 ms
Maximum axial force fa104 N force pressure) 104 N tensile force)
Number of motor stacks2
Continuous stall torque5.04 lbf.in (0.57 N.m)
Maximum radial force fr107 N
Centring collar diameter2.0 in (50 mm)
Speed feedback resolution16384 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILA2T572TB1F0 is a Schneider Lexium integrated drive combining an AC synchronous servo motor and drive electronics in one package, rated 0.57 N.m torque at 10 W on a 48 V DC supply. It carries a holding brake, single-turn encoder feedback, and Modbus TCP communication over RS485 at 9.6, 19.2, or 38.4 kbaud, with IP54 protection except at the shaft bushing.

The ILA2T572TB1F0 uses 6 poles versus the 5 poles of the BMH1401P36F2A, which shifts the speed-torque curve; the ILA also integrates the drive, while the BMH is a standalone motor requiring a separate Lexium 32 drive.

MPN
ILA2T572TB1F0