Skip to main content
Log in
Schneider Electric ILE2K661PB1A7

Schneider ILE2K661PB1A7 Lexium Integrated Drive, 9.2 N.m, 54 rpm

MPNILE2K661PB1A7
Obsolete

Schneider ILE2K661PB1A7 — now discontinued, supplied from remaining surplus and broker stock.

$2,740.00Ref. price · indicative, final on quote
Schneider Electric ILE2K661PB1A7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILE2K661PB1A7 key specifications
ParameterValue
Motor typeBrushless DC motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeBLDC encoder
Gear box typeWorm gear, 3 stages
Protection typeSafe torque off Overload of output voltage Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55.2 V
Discrete output voltage23...25 V

All specifications

ILE2K661PB1A7 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7000 mA peak 5500 mA maximum continuous
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum supply current0.1 A power stage disabled) 6.8 A 24 V 2.6 A 48 V
Maximum switching current100 mA per output 200 mA total
Nominal output power41 W 24 V 42 W 48 V
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet/IP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (4.4 mm)
Number of mounting holes2
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
StandardsIEC 50347 IEC 50178 EN 61800-3 : 2001-02 IEC 61800-3, Ed 2 IEC 61800-3 IEC 60072-1 EN 61800-3:2001, second environment
Length9.02 in (229 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endHole
Second shaftWithout second shaft end
Detent torque108.9 lbf.in (12.3 N.m)
Holding brakeWithout
Nominal speed44 rpm 24 V 44 rpm 48 V
Rotor inertia1270 kg.cm²
Accuracy error+/- 1 point
Nominal torque81.4 lbf.in (9.2 N.m) 24 V 81.4 lbf.in (9.2 N.m) 48 V
Reduction ratio92:1 (735:5)
Device short nameILE
Motor flange size2.6 in (66 mm)
Peak stall torque175.07 lbf.in (19.78 N.m) 24 V 175.07 lbf.in (19.78 N.m) 48 V
Transmission rate125, 250, 500 kbauds
Service life in hours9000 h bearing
Associated fuse rating16 A
Maximum axial force fa80 N
Number of motor stacks1
Continuous stall torque102.7 lbf.in (11.6 N.m)
Maximum radial force fr200 N
Centring collar diameter1.4 in (36 mm)
Maximum mechanical speed54 rpm
Speed feedback resolution12 points/turn motor 0.33° gearbox output
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILE2K661PB1A7 is a Schneider Lexium integrated drive combining a 6-pole brushless DC motor with a 3-stage worm gear, delivering 9.2 N.m of torque at both 24 V and 48 V supplies, with a maximum output speed of 54 rpm. EtherNet/IP is integrated on the drive, and safe torque off is built in, so no separate safety relay or fieldbus module is needed for basic stop functions. The unit is rated for 150 m/s² shock per IEC 60068-2-29 and carries CE marking; the IP rating is IP41 at the shaft bushing and IP54 over the rest of the housing.

MPN
ILE2K661PB1A7