Schneider Electric ILE2K661PC1A4
MPNILE2K661PC1A4
Active
Square D ILE2K661PC1A4 Integrated Drive/Motor|Square D ILE2K661PC1A4 Integrated Drive/Motor
$847.09 – $1,830.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Motor type | Brushless DC motor |
| Network type | DC |
| Winding type | Medium speed of rotation and medium torque |
| Feedback type | BLDC encoder |
| Gear box type | Straight teeth gear, 4 stages |
| Protection type | Safe torque off Overload of output voltage Short circuit of the output voltage |
| Type of cooling | Natural convection |
| Range of product | Lexium integrated drive |
| Input (output type) | 4 signals (each be used as input or output) |
| Product or component type | Motion integrated drive |
| Supply voltage limits | 18...55.2 V |
| Discrete output voltage | 23...25 V |
All specifications
| Parameter | Value |
|---|---|
| Supply voltage | 24 V 48 V |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Current consumption | 7000 mA peak 5500 mA maximum continuous |
| Discrete input current | 10 mA at 24 V on/STO_A for safety input 3 mA at 24 V on/STO_B for safety input 2 mA at 24 V for 24 V signal interface |
| Maximum supply current | 0.1 A (power stage disabled) 6.8 A at 24 V 3.8 A at 48 V |
| Maximum switching current | 100 mA per output 200 mA total |
| Nominal output power | 54 W at 24 V 68 W at 48 V |
| Number of motor poles | 6 |
| Network number of phases | Single phase |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Commissioning interface | RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) |
| Communication interface | Ethernet/IP, integrated |
| Mounting support | Flange |
| Mounting holes diameter | 4.4 mm |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 73.54 mm |
| Electrical connection | Industrial connector |
| Shock resistance | 150 m/s² 1000 shocks conforming to IEC 60068-2-29 |
| Relative humidity | 15...85 % without condensation |
| Operating altitude | <= 1000 m without derating |
| Vibration resistance | 20 m/s² (f= 10...500 Hz) 10 cycles conforming to IEC 60068-2-6 |
| Key width | 16 mm |
| Centring collar depth | 4 mm |
| Standards | IEC 61800-3 IEC 61800-3, Ed 2 IEC 50347 IEC 50178 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment IEC 60072-1 |
| Length | 174 mm |
| Marking | CE |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft length | 25 mm |
| Detent torque | 9.19 N.m |
| Holding brake | Without |
| Nominal speed | 35 rpm at 24 V 44 rpm at 48 V |
| Rotor inertia | 1962 kg.cm² |
| Accuracy error | +/- 0.5 point |
| Nominal torque | 12 N.m at 24 V 12 N.m at 48 V |
| Shaft diameter | 10 mm |
| Reduction ratio | 115:1 (3675:32) |
| Device short name | ILE |
| Motor flange size | 66 mm |
| Peak stall torque | 24.72 N.m at 24 V 24.72 N.m at 48 V |
| Transmission rate | 125, 250, 500 kbauds |
| Service life in hours | 2500 h bearing short-term operation 15000 h bearing long-term operation |
| Associated fuse rating | 16 A |
| Maximum axial force fa | 10 N (long-term operation) 80 N (short-term operation) |
| Number of motor stacks | 1 |
| Continuous stall torque | 14 N.m |
| Maximum radial force fr | 200 N (long-term operation) 200 N (short-term operation) |
| Centring collar diameter | 16 mm |
| Maximum mechanical speed | 44 rpm |
| Speed feedback resolution | 12 points/turn motor 0.26° gearbox output |
| Maximum torsional backlash | 1 ° |
| Ambient air temperature for storage | -25...70 °C |
| Ambient air temperature for operation | 40...55 °C (with power derating of 2 % per °C) 0...40 °C (without derating) |
| Permissible ambient air temperature around the device | 105 °C power amplifier 110 °C motor |
MPN
ILE2K661PC1A4